White Wall Mounted Sanitary Ware Toilet
White Wall-Mounted Sanitary Ware Toilet
This fixture combines a vitreous china bowl with a concealed tank system, designed for direct attachment to a structural wall. The wall‑mounted configuration eliminates floor contact, simplifying cleaning and reducing the footprint in commercial restrooms.
Technical Specifications
- Bowl height from finished floor: 300 mm ± 2 mm (ADA‑compliant range 300‑340 mm)
- Outlet centerline distance from wall: 180 mm ± 2 mm
- Flushing mechanism: pressure‑assisted, 1.28 L per full flush (dual‑flush optional 0.8 L/1.6 L)
- Maximum static load on bowl: 400 N (tested per EN 997)
- Water inlet connection: ½‑inch NPT female, compatible with standard supply valves
- Tank volume (concealed): 6 L, positioned within wall cavity
Materials and Construction
The bowl and tank are fabricated from vitreous china with a silica‑based glaze fired above 1200 °C, providing a non‑porous surface resistant to staining and chemical attack. Internal flushing components utilize corrosion‑resistant brass and engineered polymers rated for continuous water exposure.
Mounting brackets are cold‑rolled steel, hot‑dip galvanized to a minimum zinc coating of 55 g/m², ensuring a corrosion life exceeding 25 years in typical indoor environments.
All seals are EPDM rubber, certified to withstand temperature fluctuations from –20 °C to 80 °C without loss of elasticity.
Design and Dimensions
The overall projection from the finished wall to the front of the bowl is 560 mm, allowing adequate knee clearance for users while maintaining a compact profile suitable for high‑traffic corridors.
The bowl’s interior rim radius is 20 mm, facilitating efficient water swirl and reducing the likelihood of clogging. The trapway diameter is 50 mm, meeting EN 997 requirements for waste passage.
Aesthetic options include a standard glossy white finish (RAL 9003) and a matte variant upon request, both retaining identical functional properties.
Installation Requirements
Installation necessitates a load‑bearing wall stud or concrete backing capable of resisting a shear force of at least 1.5 kN. The mounting hardware includes two M10 anchor bolts with chemical‑set epoxy for enhanced pull‑out resistance.
Rough‑in dimensions must accommodate a minimum cavity depth of 120 mm behind the finished wall to house the concealed tank and supply lines.
Water supply pressure should be maintained between 0.1 MPa and 0.5 MPa; a pressure‑reducing valve is recommended if upstream pressure exceeds 0.5 MPa.
Performance and Compliance
Flushing performance is validated per ASME A112.19.2/CSA B45.1, achieving a minimum bowl clean‑score of 450 g of waste removal per flush under test conditions.
The product meets EU Water Label criteria for Class A efficiency, consuming no more than 1.3 L per average flush in dual‑flush mode.
Fire resistance of the mounting brackets complies with EN 13501‑1, achieving a rating of A2‑s1,d0.
Typical Applications
Wall‑mounted toilets are selected for environments where floor space must be maximized, such as airport terminals, hospital wards, and high‑density office complexes. The concealed cistern reduces visual clutter and minimizes potential damage from cleaning equipment.
In healthcare settings, the seamless bowl‑to‑wall junction eliminates crevices that could harbor pathogens, supporting infection‑control protocols.
Educational institutions benefit from the reduced height options, allowing installation of ADA‑compliant units without extensive floor‑work.
Quality Assurance
Each unit undergoes dimensional inspection using coordinate‑measuring machines, verifying critical tolerances (±0.5 mm) on bowl geometry and outlet alignment.
Hydrostatic testing of the concealed tank is performed at 1.5× working pressure (0.9 MPa) for 5 minutes, with no permissible leakage.
Surface gloss is measured at 60°; acceptable range is 70‑85 GU for the standard finish, ensuring consistency across production batches.
Customization Options
Customers may specify alternative flush volumes (dual‑flush 0.6 L/1.1 L) to meet local water‑conservation regulations.
Seat and lid materials are available in polypropylene, urea‑formaldehyde, or antimicrobial‑treated polymers, each with defined chemical resistance data.
Custom color matching to RAL or Pantone standards can be arranged, subject to minimum order quantities and additional glaze firing cycles.
Technical Data Table
| Parameter | Typical Value | Notes |
|---|---|---|
| Bowl Height (finished floor) | 300 mm | Adjustable ±10 mm via mounting bracket |
| Outlet Centerline from Wall | 180 mm | Standard rough‑in |
| Flush Volume (full) | 1.28 L | Pressure‑assisted; dual‑flush optional |
| Maximum Static Load | 400 N | Per EN 997 test |
| Tank Volume (concealed) | 6 L | Located within wall cavity |
| Water Inlet Connection | ½‑inch NPT Female | Standard supply valve compatibility |
| Material – Bowl | Vitreous China | Glazed >1200 °C |
| Mounting Bracket – Steel | Hot‑dip Galvanized | Zn coating ≥55 g/m² |
Frequently Asked Questions
Can the toilet be installed on non‑load‑bearing partitions?
Installation on non‑load‑bearing walls requires reinforcement with a steel backing plate or a purpose‑designed carrier system to transfer loads to the building structure.
What information is needed for a quotation?
Provide the rough‑in dimensions, desired flush volume, seat material, and any custom color or branding requirements. Wall construction type (stud, concrete, or block) helps determine appropriate mounting hardware.
Are replacement parts available?
All internal flushing components, seat hinges, and mounting brackets are stocked as spare parts, identified by part numbers listed in the installation manual.
How is the product protected during export?
Units are packed in double‑wall corrugated cartons with corner protectors, and the concealed tank is sealed in a moisture‑barrier bag to prevent damage from humidity and impact.
Contact for Inquiry
For technical data sheets, CAD models, or to discuss project‑specific requirements, please reach out via the contact form.
Request Information
