Square Stainless Steel Wall Hung Toilet
Square Stainless Steel Wall Hung Toilet
This fixture combines a square bowl geometry with wall‑mounted installation to save floor space and simplify cleaning. The bowl is fabricated from stainless steel sheet, providing a seamless surface that resists staining and bacterial growth in high‑traffic environments.
Design features include a rimless interior, which eliminates hidden crevices where debris can accumulate, and a concealed trapway that maintains a smooth exterior profile. The flush mechanism is engineered for a low‑volume, high‑velocity discharge, typically using 4.5 L per flush while achieving effective waste removal.
Material selection defaults to AISI 304 stainless steel with a 1.2 mm thickness for the bowl and tank components, offering a balance of corrosion resistance and formability. For environments exposed to chlorides or aggressive cleaning agents, AISI 316L is available upon request, providing enhanced pitting resistance. All surfaces receive a brushed finish followed by passivation to restore the protective chromium oxide layer.
Performance ratings are based on standardized testing: the unit withstands a static load of 150 kg applied to the seat without deformation, operates reliably at water pressures between 150 kPa and 500 kPa, and generates flush noise below 55 dB(A). These values ensure comfort and durability in public restrooms, healthcare facilities, and industrial washrooms.
Installation requires a reinforced wall carrier capable of supporting the fixture’s weight and dynamic loads. Rough‑in dimensions call for a 110 mm waste outlet centered 200 mm above the finished floor, with hot and cold water supplies positioned 150 mm left and right of the centerline. The mounting brackets are adjustable to accommodate varying stud spacing, and a concealed cistern integrates behind the wall panel for a clean appearance.
Typical Applications
The square profile and wall‑hung configuration make this toilet suitable for spaces where hygiene, durability, and aesthetic consistency are priorities. Its non‑porous surface withstands frequent disinfection cycles, and the elevated bowl reduces contact with floor contaminants.
- Commercial office restrooms with high user turnover
- Healthcare patient rooms and surgical suites requiring strict infection control
- Industrial locker rooms and washdown areas exposed to chemicals
Quality Assurance
Manufacturing follows CNC laser cutting of stainless steel blanks, precision TIG welding of seams, and electropolishing to achieve a uniform surface roughness below 0.4 µm Ra. Each unit undergoes hydrostatic testing at 1.5× working pressure, functional flush verification, and visual inspection for weld integrity and finish consistency. Documentation includes material test reports and a certificate of conformance to EN 997:2012+A1:2015 for wall‑hung toilets.
Customization Options
Dimensions can be adjusted within a ±10 mm range to match specific architectural layouts. Flush mechanisms are available as dual‑flush (3 L/4.5 L) or sensor‑activated variants. Surface finishes include brushed, mirror polish, or antimicrobial coating. Optional accessories such as concealed grab bars, seat covers with quick‑release hinges, and integrated hand‑dryers can be specified.
Technical Specifications
| Parameter | Typical Value | Notes |
|---|---|---|
| Bowl Material | AISI 304 (316L optional) | Sheet thickness 1.2 mm |
| Flush Volume | 4.5 L (dual‑flush 3 L/4.5 L) | Adjustable per project |
| Static Load Capacity | 150 kg | Seat area, no deformation |
| Operating Pressure | 150–500 kPa | Water supply range |
| Flush Noise Level | <55 dB(A) | Measured at 1 m distance |
| Surface Roughness | ≤0.4 µm Ra | After electropolishing |
Frequently Asked Questions
Can dimensions be customized? Yes, bowl width, height, and projection can be adjusted within ±10 mm to suit specific rough‑in constraints.
What information is required before quotation? Provide wall stud spacing, required flush volume, preferred stainless steel grade, and any accessory needs (e.g., sensor flush, grab bars).
How is quality inspected? Each unit undergoes hydrostatic pressure testing, functional flush verification, visual weld inspection, and surface roughness measurement before packaging.
What packaging methods are available for export? Units are packed in double‑wall corrugated cartons with corner protectors, foam edge guards, and moisture‑barrier lining; palletized upon request.
Contact our engineering team for a detailed quotation and technical datasheet.
