OEM Round Wall Hung Toilet

The round wall-hung configuration eliminates floor‑mounted pedestals, reducing cleaning surfaces and simplifying plumbing layouts in high‑traffic industrial restrooms.

Technical Overview

Fixture height from finished floor to rim is typically 420 mm, complying with ADA‑type accessibility guidelines while maintaining a compact projection of 560 mm from wall to front edge.

Outlet diameter is 100 mm with a standard S‑trap, allowing direct connection to common 110 mm waste stacks without adapters.

Flush valve operates at 0.8 L per flush for low‑flow models and 1.2 L for standard performance, delivering a minimum trap seal of 50 mm to prevent odor migration.

Typical Specifications

Parameter	Value	Notes
Fixture Material	Vitreous china	Glazed surface, water absorption <0.5%
Wall Mount Load Rating	150 kg static	Tested per EN 997
Flushing Mechanism	Pressurized rim jets	Dual‑option (0.8 L/1.2 L)
Surface Finish	High‑gloss, UV‑stable	Resistant to cleaning agents pH 4‑10

Design and Materials

Vitreous china provides a non‑porous barrier that inhibits bacterial growth and maintains structural integrity under repeated thermal cycling from hot water cleaning.

The integral mounting bracket is fabricated from stainless steel grade 304, offering corrosion resistance in environments with frequent exposure to cleaning chemicals and humidity.

• Optional antimicrobial glaze additive reduces surface colonisation by up to 99 % after 24 h exposure.
• Reinforced wall anchors distribute load across at least three studs, minimizing point stress on drywall or masonry substrates.
• Sound‑dampening gasket between fixture and wall reduces transmission of flush noise by approximately 8 dB.

Installation Considerations

Proper rough‑in height must be verified before bracket installation; deviation greater than ±5 mm can affect seat alignment and flush performance.

Water supply lines should be terminated with a 15 mm shut‑off valve positioned within 200 mm of the inlet to facilitate maintenance without draining the entire line.

Backing board made of moisture‑resistant plywood or cement board is recommended behind the bracket to prevent flexing under load.

Applications in Industrial Facilities

In manufacturing plants where hygiene protocols require frequent floor scrubbing, wall‑hung fixtures eliminate crevices that harbour debris, reducing custodial labour by approximately 15 % per shift.

Food processing environments benefit from the seamless glazed surface, which withstands aggressive sanitizers and prevents retention of organic residues that could contaminate product lines.

Pharmaceutical cleanrooms utilize the low‑profile design to maintain unobstructed airflow patterns, supporting ISO Class 7‑8 particulate control requirements.

Customization Options

• Seat cover materials: polypropylene, urea‑formaldehyde, or stainless steel with quick‑release hinges.
• Flush actuator types: manual push‑button, infrared sensor, or foot‑operated lever for hands‑free operation.
• Color selections beyond standard white: matte black, slate gray, or custom RAL matches upon request.
• Integrated bidet functionality with adjustable temperature and pressure controls available as a factory‑installed module.

Quality Assurance

Each unit undergoes dimensional verification using laser scanning to ensure wall‑mount hole spacing tolerance of ±0.2 mm.

Glaze adhesion is tested via cross‑hatch ASTM D3359, requiring a minimum rating of 4B before shipment.

Flow performance is validated on a calibrated test rig, confirming flush volume within ±5 % of the specified rating across a pressure range of 150‑500 kPa.

FAQ

Can the rough‑in height be adjusted? Yes, the mounting bracket includes vertical slots allowing ±10 mm adjustment to accommodate varying wall stud layouts.

What information is required for a quotation? Provide required flush volume, seat material preference, any custom color or branding, and projected order quantity.

How are units protected during export? Each toilet is placed in a double‑wall corrugated carton with corner protectors and wrapped in a polyethylene shrink film to resist moisture and impact.