Oem Designer Elongated Wall Hung Toilet
OEM Designer Elongated Wall-Hung Toilet
Product Overview
An elongated wall-hung toilet combines a forward‑extended bowl profile with a concealed tank mounted behind the wall. The typical bowl length ranges from 460 mm to 480 mm, providing additional seated comfort compared to round fronts while maintaining a compact footprint suitable for tight restroom layouts. Wall mounting eliminates the floor‑standing base, reducing cleaning surfaces by approximately 30 % and allowing flexible height adjustment between 400 mm and 500 mm from finished floor to suit various accessibility requirements.
Technical Specifications
| Specification | Typical Value |
|---|---|
| Bowl Shape | Elongated (front‑extended) |
| Overall Height (adjustable) | 400 mm – 500 mm from finished floor |
| Rough‑in Distance | 120 mm (standard) – customizable 100 mm–150 mm |
| Water Consumption per Flush | 4.8 L (dual‑flush) or 6.0 L (single‑flush) |
| Primary Material | Vitreous china (ASTM C1088) |
| Maximum Load Capacity | 400 kg static load (seat and lid) |
| Flush Mechanism | Pressure‑assist or gravity‑feed, concealed cistern |
| Surface Finish | Glazed, scratch‑resistant, easy‑clean coating |
Key Design Features
- Concealed tank reduces visual clutter and simplifies floor‑to‑wall cleaning.
- Elongated bowl provides ~20 mm extra seated length versus round front, improving user comfort.
- Adjustable mounting brackets accommodate varying wall stud spacing and allow height customization.
- Integrated anti‑siphon valve prevents backflow in accordance with plumbing codes.
- Seat and lid equipped with soft‑close hinges to minimize impact noise and wear.
Typical Applications
In commercial office buildings, the wall‑hung configuration frees floor space for easier maintenance and supports ADA‑compliant height settings without altering plumbing rough‑in. Healthcare facilities benefit from the seamless surfaces that reduce bacterial harborage and enable rapid disinfection between patient visits. Hospitality environments, such as boutique hotels, select elongated bowls for guest comfort while retaining a sleek, modern aesthetic that aligns with interior design concepts.
Customization Options
- Bowl color: standard white, custom RAL or Pantone matches available upon request.
- Flush valve type: dual‑flush 3 L/6 L, single‑flush 4.8 L, or low‑flow 3.0 L variants.
- Seat material: polypropylene, urea‑formaldehyde, or antimicrobial‑treated options.
- Mounting hardware: steel brackets with corrosion‑resistant coating, adjustable depth plates for varying wall thicknesses.
- Accessory packages: concealed sensor‑activated flush, touch‑free lid, or integrated bidet functionality.
Quality Control & Testing
Each unit undergoes dimensional verification using calibrated CMM equipment to ensure bowl length, height, and rough‑in tolerances remain within ±2 mm of design specifications. Glaze uniformity is assessed via reflected light inspection to detect pinholes or thinning exceeding 0.05 mm depth. Load testing applies a static 400 kg force to the seat area for five minutes with no permanent deformation observed. Water consumption is measured per flush using calibrated flow meters, confirming compliance with the selected flush rate ±0.2 L. Final visual inspection checks for surface defects, sharp edges, and proper operation of soft‑close hinges before packaging.
Frequently Asked Questions
- Can the bowl length be altered? Yes, the elongated profile can be adjusted between 440 mm and 500 mm to suit specific ergonomic or space constraints.
- What information is required for a quotation? Project‑specific rough‑in distance, desired flush volume, seat material, and any custom color or branding requirements.
- Which materials are available for the vitreous china body? Standard ASTM C1088 vitreous china is standard; alternative formulations with increased chemical resistance can be supplied upon request.
- How is quality inspected before shipment? As outlined in the Quality Control section: dimensional CMM checks, glaze inspection, load testing, flow verification, and final visual audit.
- What packaging methods protect the product during transit? Units are placed in double‑wall corrugated cartons with corner protectors, foam edge guards, and a moisture‑resistant inner wrap; palletized shipments include stretch film and corner boards.
- What is the typical production lead time? Lead time ranges from 4 to 6 weeks after receipt of approved drawings and deposit, depending on order volume and customization complexity.
- How are samples arranged for evaluation? Sample units can be shipped via express freight; the customer covers shipping costs, and the sample fee is credited toward the first production order.
Contact for OEM Collaboration
To discuss technical requirements, request a detailed quote, or arrange sample evaluation, please use the inquiry link below.
