Factory Supply Slimline Wall Hung Toilet

A slimline wall hung toilet integrates the pan and concealed cistern within a single unit that mounts directly to a structural wall, eliminating the floor‑standing base. This configuration reduces the footprint by up to 30 % compared with conventional close‑coupled models, while maintaining the same flushing performance.

Key Technical Characteristics

Overall dimensions typically measure 360 mm width, 540 mm depth, and 340 mm height from the finished floor to the top of the pan rim. The vitreous china body is formulated to withstand a static load of at least 400 kg, verified by EN 997‑type load testing. Flushing volume is adjustable between 3 L and 4.5 L per cycle, allowing compliance with regional water‑efficiency standards.

Specification	Typical Value	Notes
Overall Width	360 mm	Measured at widest point of pan
Overall Depth	540 mm	Includes cistern protrusion
Overall Height	340 mm	From finished floor to pan rim
Pan Rim Height	340 mm	Standard accessible height
Load Capacity	≥400 kg static	EN 997‑type test
Flush Volume Range	3 L – 4.5 L	Adjustable via cistern mechanism
Material	Vitreous china	Glazed, non‑porous
Seat Mounting	Top‑fix with concealed bolts	Quick‑release hinges
Water Inlet Pressure	0.1 – 0.5 MPa	Standard cold‑water supply
Waste Outlet Diameter	100 mm	PVC or ABS compatible

Wall mounting requires a load‑bearing stud or concrete backing capable of resisting the dynamic forces generated during flushing. A concealed cistern frame is installed behind the finished wall, providing access via a removable service panel for maintenance. The rough‑in distance from the finished wall to the centre of the waste outlet is commonly 180 mm, but adjustable brackets allow ±10 mm tolerance. Flexible supply hoses and a shut‑off valve are typically included to simplify connection to the building’s cold‑water line.

• Load‑bearing wall studs or concrete backing
• Concealed cistern frame with service panel
• Adjustable mounting brackets
• Flexible supply hose with shut‑off valve
• Waste outlet coupling with rubber seal

Applications in Industrial Facilities

Industrial facilities benefit from the reduced floor protrusion, which eases cleaning around machinery and minimizes trip hazards. The smooth vitreous china surface resists chemical staining and permits routine disinfection with standard industrial cleaners. Water savings of up to 30 % per fixture contribute to lower utility costs in high‑usage settings such as factories, warehouses, and laboratories.

Quality Assurance and Testing

Each unit undergoes dimensional inspection to ensure critical features stay within ±2 mm tolerance. Glaze integrity is verified by a 120‑second abrasion test per ISO 10545‑7, confirming resistance to scratching and staining. Load testing applies a static force of 500 kg for 10 minutes with no permanent deformation observed. Flush performance is measured using a standardized test rig to confirm complete trapway clearance at the rated volume.

Customization Options

Buyers can specify the pan colour from a standard palette of white, off‑white, or light grey, with custom colours available upon request. Flushing mechanism options include a dual‑flush push button, a single‑flush lever, or an infrared sensor actuator. Seat materials range from polypropylene to soft‑close thermoplastic, and antimicrobial coatings can be applied to the seating surface.

Frequently Asked Questions

Can the dimensions be customized for specific rough‑in requirements?

Yes. Mounting brackets and cistern frames can be adjusted to accommodate rough‑in variations typically ranging from 150 mm to 210 mm, subject to structural verification.

What information is required before a quotation can be issued?

Project details such as required quantity, preferred flush volume, seat material, colour, and any special certification needs (e.g., WRAS, NSF) enable an accurate quote.

Which materials are available for the seat and flush mechanism?

Seats are offered in polypropylene, soft‑close thermoplastic, or wood‑filled composite; flush mechanisms include pneumatic push‑buttons, lever‑type, or touch‑free infrared sensors.

How is the product protected during export shipment?

Each toilet is packed in a double‑wall corrugated carton with corner protectors, internal foam brackets for the cistern frame, and a moisture‑barrier liner to prevent damage during transit.

Contact Us

To request a quotation, sample, or technical datasheet, please complete the form on our contact page.

Request a quotation   Request a sample   Download technical datasheet