Factory Supply Most Expensive Bidet Toilet
Factory Supply Most Expensive Bidet Toilet
This unit combines a vitreous china toilet bowl with an integrated bidet module that provides warm water cleansing, heated seat, and air drying. It is intended for commercial environments where consistent hygiene and user comfort are required.
Key Technical Specifications
- Flushing mechanism: pressure‑assisted siphon jet, 1.28 GPF (4.8 LPF) nominal.
- Bidet water flow: adjustable 0.2–0.6 L/min, temperature range 30–40 °C.
- Heated seat: surface temperature 30–38 °C, power consumption ≤15 W.
- Air dryer: airflow 2.5 m³/h, temperature 40–45 °C.
- Electrical: 110–240 V AC, 50/60 Hz, max 180 W.
- Ingress protection: nozzle assembly IPX4, control panel IPX5.
Material Construction
The toilet bowl is made of vitreous china with a glazed surface that resists staining and chemical attack. The bidet nozzle is stainless steel (AISI 304) with a PTFE coating to prevent scale buildup. The seat and lid are manufactured from antimicrobial polypropylene reinforced with glass fiber for impact resistance.
Functional Features
- Adjustable water temperature and pressure via electronic control.
- Heated seat with three preset levels and quick‑heat function.
- Warm air dryer with adjustable temperature and shut‑off timer.
- Integrated deodorizer using activated carbon filter.
- Self‑cleaning nozzle that rinses before and after each use.
- Wireless remote control with LCD display, wall‑mountable.
Installation and Compatibility
The unit requires a standard 12‑inch rough‑in, a cold water supply line with shut‑off valve, and a dedicated grounded electrical outlet. It fits within a standard 30‑inch wide bathroom stall and can be mounted to the floor using the supplied anchor bolts.
Applications in Industrial and Commercial Facilities
In manufacturing plants, maintaining restroom hygiene reduces the risk of cross‑contamination between production zones. The hands‑free operation of the bidet limits surface contact, which is valuable in environments where workers handle chemicals or food products. Additionally, the heated seat and air dryer improve user comfort during long shifts, contributing to employee satisfaction and compliance with workplace welfare standards.
Quality Control and Testing
Each assembled unit undergoes a hydrostatic pressure test at 1.5 times the working pressure to verify leak‑free performance. The bidet nozzle is cycled 50,000 times to assess wear resistance of the PTFE coating. Electrical safety is confirmed by dielectric strength testing according to IEC 60335‑2‑40 standards.
Customization Options
Available options include alternative seat colors (white, beige, gray), choice of remote control layout (wall‑mounted or side‑mounted), and voltage configuration for 110 V or 220 V markets. The nozzle length can be adjusted within a 5 mm range to accommodate different bowl geometries.
| Parameter | Typical Value |
|---|---|
| Flush volume | 1.28 GPF (4.8 LPF) |
| Bidet flow rate | 0.2–0.6 L/min adjustable |
| Seat heating power | ≤15 W |
| Air dryer airflow | 2.5 m³/h |
| Electrical rating | 110–240 V AC, 50/60 Hz, max 180 W |
| Ingress protection (nozzle) | IPX4 |
| Ingress protection (control) | IPX5 |
- Can the water temperature be set independently of the seat heating?
- Yes, the bidet water temperature and seat heating are controlled via separate circuits, allowing independent adjustment.
- What maintenance is required for the nozzle?
- The nozzle features a self‑cleaning rinse cycle; periodic descaling with a mild acetic solution is recommended in hard water areas.
- Is the unit compatible with existing gravity‑flush toilets?
- It replaces the standard toilet bowl and tank; installation requires the specified rough‑in and electrical connection, not a retrofit of an existing gravity‑flush unit.
