Factory Supply Matte White Wall Hung Toilet

This wall‑mounted fixture is designed for commercial and institutional restrooms where space efficiency and ease of cleaning are priorities. The matte white finish reduces glare and minimizes the visibility of water spots compared to glossy surfaces.

Design and Construction

The toilet features a concealed tank system integrated within the wall cavity, eliminating the need for a visible cistern. This configuration lowers the overall profile to approximately 350 mm from the finished floor, facilitating barrier‑free access.

Vitreous china forms the core body, fired at temperatures exceeding 1200 °C to achieve low water absorption (<0.5 %). The matte glaze is applied through a spray‑coating process that yields a uniform non‑reflective surface with a measured gloss level of 5‑10 GU.

• Rimless bowl design reduces crevices where bacteria can accumulate.
• Dual‑flush mechanism offers 3 L/6 L options, adjustable via the concealed actuator.
• Mounting brackets accommodate standard stud spacing of 400 mm or 600 mm.

Technical Specifications

Property	Typical Value
Overall Dimensions (L × W × H)	560 mm × 360 mm × 350 mm
Outlet Diameter	100 mm (standard waste)
Water Consumption (Dual Flush)	3 L (low) / 6 L (full)
Load Capacity	400 kg static
Surface Hardness (Mohs)	5‑6
Chemical Resistance	Resistant to pH 4‑10 cleaning agents

Installation Requirements

Installation necessitates a reinforced wall cavity capable of supporting the static load plus dynamic forces during use. A minimum stud gauge of 0.9 mm (20 ga) is recommended, with horizontal blocking at 600 mm intervals to anchor the mounting frame.

The concealed tank requires a water supply line with a minimum pressure of 0.15 MPa and a drain line graded at 2% toward the soil stack. Access panels should be provided for future maintenance of the flush valve and inlet components.

Applications

In high‑traffic environments such as airports, hospitals, and educational facilities, the reduced footprint allows for increased fixture density without compromising accessibility standards. The matte finish also aids in maintaining a consistent visual appearance under varied lighting conditions.

• Public restrooms where water conservation is mandated.
• Healthcare settings requiring smooth, non‑porous surfaces for infection control.
• Hotel guest bathrooms aiming for a minimalist aesthetic.

Quality Assurance

Each unit undergoes dimensional verification using laser scanning to ensure tolerance within ±2 mm on critical interfaces. Glaze thickness is measured via ultrasonic testing, targeting a range of 0.12‑0.18 mm to guarantee uniform matte appearance.

Functional testing includes flush performance validation at both low and full volumes, confirming effective waste removal with less than 5 mL residual water per cycle. Leak tests are performed at 1.5× operating pressure for 10 minutes with no detectable seepage.

Customization Options

While the standard offering features a matte white glaze, alternative RAL colors can be supplied upon request, subject to minimum order quantities. The flush actuator can be configured for pneumatic, electronic, or manual actuation depending on building management system integration.

• Special anti‑microbial glazing additives.
• Variations in outlet orientation (horizontal or vertical).
• Custom bracket kits for non‑standard stud layouts.

Call to Action

For project‑specific inquiries, including lead times, pricing, and technical data sheets, please contact our sales team. Provide the required quantity, installation environment, and any customization needs to receive a detailed quotation.

Request Quotation