Factory Supply Installing A Wall Hung Toilet
Factory Supply Wall Hung Toilet Installation Kit
This kit supplies the mounting frame, brackets, and fastening hardware needed to install a wall‑hung toilet safely in high‑traffic restrooms. It is engineered to meet the load requirements of commercial fixtures while allowing quick, repeatable installation.
Technical Overview
The core load‑bearing element is a steel carrier plate rated for a static load of 400 kg (≈880 lb) with a safety factor of 2.5. The plate is formed from 2.5 mm cold‑rolled steel, punched for bolt patterns that match most standard wall‑hung toilet bowls.
Key Components
- Steel carrier plate (pre‑drilled)
- Adjustable support brackets (2 pcs)
- M10×80 mm high‑strength bolts with nylon lock nuts
- Rubber isolation washers (4 pcs)
- Installation template (paper or polymer)
Material Options
| Part | Standard Material | Optional Upgrade |
|---|---|---|
| Carrier plate | Cold‑rolled steel (S235JR) | Stainless steel 304 (for corrosive environments) |
| Brackets | Galvanized steel | Stainless steel 316 |
| Bolts | Grade 8.8 steel | Grade 10.9 steel |
Dimensions and Compatibility
The carrier plate measures 350 mm (width) × 180 mm (height) with a thickness of 2.5 mm. Bolt hole spacing follows the common 180 mm horizontal and 230 mm vertical pattern, accommodating most wall‑hung toilet models from major manufacturers.
| Parameter | Value |
|---|---|
| Overall width | 350 mm |
| Overall height | 180 mm |
| Plate thickness | 2.5 mm |
| Horizontal hole spacing | 180 mm |
| Vertical hole spacing | 230 mm |
| Maximum static load | 400 kg |
Installation Process
- Mark the mounting height on the wall using the supplied template.
- Drill pilot holes for the carrier plate bolts according to the template.
- Insert the carrier plate and secure with M10 bolts, torque to 25 Nm.
- Attach the adjustable brackets to the plate; adjust to align with the toilet bowl’s mounting points.
- Place the wall‑hung toilet onto the brackets, insert the bowl bolts, and tighten to the manufacturer’s specification.
- Apply silicone sealant around the base if required by local code.
Quality Assurance
Each kit undergoes dimensional inspection of the carrier plate (±0.2 mm tolerance) and bolt hole position verification using a CNC‑driven gauge. Material hardness is checked on a Rockwell B scale to confirm compliance with Grade 8.8 specifications. Final assembly is torque‑tested to ensure bolt preload meets design load.
Documentation includes a material test certificate, inspection report, and installation guide, all provided in PDF format with each shipment.
Customization Options
For projects requiring non‑standard bolt patterns or increased load capacity, the carrier plate can be re‑punched or upgraded to a thicker 3.0 mm plate. Bracket lengths are adjustable in 10 mm increments via slotted holes, allowing accommodation of varying wall stud spacing.
- Alternative hole patterns (custom CAD data required)
- Stainless steel 304/316 material selection
- Pre‑applied anti‑corrosion coating (zinc‑nickel)
- Bulk packaging for OEM lines (pallets of 50 kits)
Applications
Wall‑hung toilets are preferred in facilities where floor space must remain unobstructed for cleaning equipment or where accessibility standards demand a higher seat height. The installation kit provides the structural reliability needed in environments such as airports, hospitals, and manufacturing plants, where fixtures are subjected to frequent use and periodic deep‑cleaning cycles.
By separating the load from the floor, the system reduces wear on flooring surfaces and simplifies maintenance, contributing to lower lifecycle costs for the restroom installation.
Frequently Asked Questions
Can the carrier plate be customized for non‑standard bolt patterns?
Yes. The plate can be re‑punched based on customer‑provided CAD drawings; lead time typically adds 5–7 days.
What information is required before a quotation?
To quote accurately we need the toilet model (or bolt pattern), wall material (e.g., stud spacing, concrete thickness), required load rating, and any material upgrades (stainless steel, coating).
How is quality inspected?
Each plate undergoes CMM verification of hole positions, hardness testing, and visual inspection for surface defects. Bolts are torque‑checked on a sample basis.
Get a Quote
To discuss your specific wall‑hung toilet installation needs, please contact our technical sales team.
Request Quotation
