Factory Supply Heritage Wall Hung Toilet
Factory Supply Heritage Wall Hung Toilet
Product Overview
The heritage wall hung toilet combines traditional aesthetics with modern engineering for factory and institutional restroom applications. It features a vitreous china bowl, concealed cistern, and a stainless steel support frame rated for dynamic loads up to 400 kg.
Technical Specifications
Key dimensions and performance data are presented below. All values are typical for standard configuration; custom sizes are available upon request.
| Parameter | Value |
|---|---|
| Overall Height (including frame) | 820 mm |
| Bowl Width | 360 mm |
| Bowl Depth | 560 mm |
| Flush Volume (dual) | 3 L / 6 L |
| Support Frame Load Rating | 400 kg static |
| Material – Bowl | Vitreous china (ISO 13006) |
| Material – Frame | Cold‑rolled steel, powder‑coated (RAL 9005) |
| Water Inlet Connection | ½‑inch BSP threaded |
| Outlet Connection | 100 mm PVC spigot |
Applications in Industrial Facilities
Wall hung toilets reduce floor‑borne contaminants and simplify cleaning in high‑traffic areas such as factory break rooms, plant offices, and laboratory suites. The concealed cistern eliminates exposed pipework, lowering the risk of impact damage from moving equipment.
Because the load is transferred to the structural frame mounted to the wall, the fixture can be installed on reinforced concrete or steel stud walls without imposing additional floor load—critical in mezzanine levels where floor capacity is limited.
Installation Considerations
The support frame includes adjustable brackets that accommodate wall thicknesses from 100 mm to 200 mm. Installation requires a minimum 12 mm plywood backing or metal stud reinforcement to achieve the rated load.
Water supply lines should be routed through the chase provided in the frame, with a shut‑off valve accessible from the service panel. The outlet connects to a standard 100 mm waste pipe using a flexible coupling to accommodate minor misalignment.
Maintenance and Serviceability
The concealed cistern is accessed via a removable front panel secured with tamper‑resistant screws. Internal components (flush valve, fill valve) are standard ½‑inch parts, allowing replacement without specialized tools.
The vitreous china surface resists staining and chemical attack from typical industrial cleaners (pH 4‑10). Routine inspection of the frame bolts every 12 months ensures continued load integrity.
Customization Options
Depending on project requirements, the following variations can be supplied:
- Alternative flush volumes (2 L/4 L low‑flow)
- Seat materials: polypropylene, urea‑formaldehyde, or antimicrobial‑treated
- Frame finish: stainless steel (grade 304) or custom powder‑coat colors
- Bowl shape: elongated or compact round
- Integrated sensor‑activated flush (battery or mains)
Quality Assurance
Each unit undergoes dimensional verification (±2 mm tolerance) and hydrostatic test of the cistern at 0.6 MPa for 5 minutes. Frame welds are inspected visually and by dye‑penetrant method per ISO 5817.
Finished products are packaged in triple‑wall corrugated cartons with corner protectors and a polyethylene moisture barrier to withstand overseas shipment.
Request a Quote
To discuss specific configurations, lead times, or request a sample unit, please contact our technical sales team.
Contact Sales
