Factory Supply Bathroom Wall Hung Toilet
Factory Supply Bathroom Wall Hung Toilet
A wall hung toilet mounts the bowl to a concealed carrier system, leaving the floor clear beneath the fixture. This configuration reduces the visible footprint by approximately 200 mm compared to floor‑mounted units and simplifies cleaning of the surrounding area.
Technical Specifications
| Parameter | Typical Value |
|---|---|
| Bowl height from finished floor | 350 mm – 400 mm (adjustable via carrier) |
| Overall width (rim to rim) | 360 mm |
| Depth from wall to front edge | 540 mm |
| Flush volume (dual‑flush) | 3 L / 4.5 L |
| Water consumption per flush (average) | ≤ 3.8 L |
| Maximum static load on bowl | 400 kg |
| Material | Vitreous china with ≥ 0.8 mm glaze thickness |
| Seat mounting | Stainless steel hinges, adjustable 0‑25 mm |
Materials and Construction
The bowl and tank are formed from vitreous china fired at > 1200 °C, yielding a non‑porous surface with water absorption below 0.5 %. A glaze layer of at least 0.8 mm provides chemical resistance to cleaning agents and inhibits microbial growth. The concealed carrier is fabricated from cold‑rolled steel, powder‑coated for corrosion protection, and includes adjustable brackets that accommodate wall studs spaced at 400 mm or 600 mm intervals.
Design Features
- Rimless bowl design eliminates hidden channels, improving flush efficiency and reducing cleaning time.
- Dual‑flush mechanism offers selectable 3 L (liquid) and 4.5 L (solid) volumes, meeting water‑saving regulations.
- Anti‑bacterial glaze additive reduces surface colonisation by common bathroom pathogens.
- Soft‑close seat option minimizes impact noise and extends hinge lifespan.
- Integrated access panel on the carrier allows quick service of the flush valve without removing the bowl.
Applications
In commercial restrooms, the wall hung configuration frees floor space for easier mopping and reduces trip hazards, which is particularly valuable in high‑traffic environments such as airports, hotels, and healthcare facilities. The concealed tank minimizes visible pipework, contributing to a clean aesthetic that supports brand image. Additionally, the adjustable height enables compliance with ADA‑required seat heights (430 mm‑480 mm) when paired with appropriate carrier settings.
Installation and Maintenance
The carrier system is secured to the wall using threaded rods and load‑bearing brackets, allowing vertical adjustment of ± 25 mm to align with finished floor levels. All water supply and waste connections are accessible via a removable service panel, eliminating the need to dismantle the bowl for routine maintenance. The flush valve employs a quarter‑turn ceramic disc design, rated for 200,000 cycles without leakage.
Quality Assurance
Each unit undergoes hydraulic pressure testing at 1.5 times the working pressure (up to 0.6 MPa) to verify seal integrity. Impact resistance is evaluated by dropping a 5 kg steel ball from a height of 1 m onto the bowl rim; no cracking is permitted. Glaze adhesion is confirmed via a cross‑hatch test according to ASTM D3359, requiring a rating of 4B or better. Final visual inspection checks for glaze uniformity, color consistency, and dimensional tolerance within ± 2 mm.
Customization Options
- Bowl color: standard white, optional beige or grey (custom glazes available upon request).
- Flush mechanism: pneumatic dual‑flush, electronic sensor‑activated, or manual single‑flush.
- Seat material: polypropylene, urea‑formaldehyde, or soft‑close wood composite.
- Accessories: concealed grab bar, integrated bidet spray, or anti‑splash lip.
Frequently Asked Questions
Can the bowl height be adjusted after installation? Yes, the carrier includes threaded rods that allow vertical movement of ± 25 mm without removing the bowl.
What information is required for a quotation? Project‑specific details such as required bowl height, flush volume preference, seat type, and any custom color or accessory needs.
Which materials are available for the bowl? Standard vitreous china; custom glaze colors or antimicrobial additives can be quoted upon request.
How is quality inspected before shipment? Each unit receives hydraulic pressure, impact, glaze adhesion, and visual checks as outlined in the Quality Assurance section.
What packaging methods are used for export? Units are packed in double‑wall corrugated cartons with corner protectors and placed on pallets; moisture‑barrier film is applied for overseas shipments.
What is the typical production lead time? Lead time ranges from 4 to 6 weeks depending on order volume and customization complexity; exact timing is confirmed at quote.
Contact for Technical Inquiry
To discuss specifications, request a quote, or obtain CAD models, please reach out to our engineering team.
Request Information
