Direct Factory Warm Water Bidet Toilet
Direct Factory Warm Water Bidet Toilet
This unit integrates a heated water supply, temperature‑controlled nozzle, and self‑cleaning functions into a single vitreous china fixture. The water heating element operates at 120 V AC with a power rating of 800 W, delivering water at a selectable range of 30 °C to 45 °C. Flow rate is regulated to 0.6 L/min to ensure adequate cleansing while limiting water consumption.
Technical Specifications
| Parameter | Value | Notes |
|---|---|---|
| Supply Voltage | 120 V AC ±10% | Single phase |
| Heater Power | 800 W | Thermostat protected |
| Water Temperature Range | 30 °C – 45 °C | Adjustable in 1 °C steps |
| Flow Rate | 0.6 L/min | Measured at 3 bar inlet pressure |
| Nozzle Material | Stainless steel 304 | Self‑cleaning mechanism |
| Overall Dimensions (L×W×H) | 700 mm × 380 mm × 460 mm | Includes tank and seat |
| Weight | 28 kg | Net weight, unpacked |
All electrical components are IEC 60335‑2‑60 certified for safety in wet environments. The tank incorporates a double‑wall insulation layer reducing standby heat loss to less than 5 W.
Design and Materials
The fixture body is manufactured from vitreous china with a compressive strength exceeding 40 MPa, providing resistance to impact and chemical cleaning agents. The seat and lid are made from polypropylene reinforced with glass fiber, offering a tensile strength of 35 MPa and UV stability for prolonged exposure to bathroom lighting.
Water pathways are constructed from PEX‑AL‑PEX composite tubing, which combines the flexibility of polyethylene with the barrier properties of aluminum, preventing permeation of odors and maintaining water temperature stability. The heating element is sheathed in incoloy 800 alloy to resist corrosion from chlorinated water supplies.
- Anti‑bacterial glaze applied to interior bowl surface (silver‑ion based)
- Quick‑release seat hinges for tool‑free maintenance
- Integrated night‑light with LED power consumption <0.5 W
Typical Applications
In healthcare facilities, the consistent warm water temperature reduces the risk of skin irritation for patients with limited mobility, supporting hygiene protocols that require frequent perineal cleansing. The self‑cleaning nozzle minimizes cross‑contamination between uses, a critical factor in infection control.
Hospitality installations benefit from the low‑flow design, which contributes to water‑saving certifications such as LEED v4.1 while maintaining guest comfort through adjustable temperature settings. The rapid heat‑up time (<30 seconds) ensures readiness during peak occupancy periods.
Industrial settings with on‑site worker showers utilize the unit’s robust construction and easy‑access service panels to reduce downtime. The modular wiring harness allows replacement of the heating cartridge without draining the tank, facilitating maintenance during shift changes.
Quality Control Philosophy
Each assembled unit undergoes a hydrostatic test at 1.5 times the working pressure (4.5 bar) for 2 minutes to verify leak‑free integrity of all joints and seals. Electrical safety is confirmed by an insulation resistance test (>10 MΩ) and earth continuity check (<0.1 Ω).
Thermal performance is validated by measuring the outlet temperature after a 10‑minute continuous draw at maximum setting; the deviation from the setpoint must remain within ±1 °C. Functional testing includes actuation cycles of the self‑cleaning nozzle (5 000 cycles) to ensure mechanical reliability.
Final inspection includes a visual check for glaze defects under 500 lux illumination and a dimensional audit of critical interfaces (seat bolts, water inlet) using calibrated calipers with a tolerance of ±0.2 mm.
Customization Options
Customers may specify alternative inlet water pressures (1 bar to 6 bar) by selecting a different flow‑regulator cartridge. The heating element can be rerated to 600 W or 1000 W to match local voltage standards or energy‑saving targets.
Seat materials are available in antimicrobial polypropylene, bamboo‑filled composite, or stainless‑steel frame with polyurethane cushion. Bowl color options extend beyond standard white to include matte gray, beige, and custom RAL matches upon request.
Control interfaces range from a mechanical rotary dial to a touch‑panel with LCD display, supporting programmable presets and remote actuation via Bluetooth Low Energy. All optional modules retain the same mounting footprint, ensuring interchangeability without redesign of the installation.
Frequently Asked Questions
Can the water temperature be limited for safety?
Yes. The thermostat includes a user‑adjustable maximum limit that can be set between 35 °C and 42 °C, preventing accidental scalding in environments such as assisted‑living facilities.
What information is required for a quotation?
We need the intended supply voltage, inlet water pressure range, desired seat material, and any control interface preferences. Quantity and delivery destination affect freight and lead‑time calculations.
How is quality inspected before shipment?
Each unit passes hydrostatic, electrical, thermal, and functional tests as described in the Quality Control section. A final audit report accompanies every shipment.
What packaging methods are available?
Standard packaging includes a double‑wall corrugated carton with foam corner protectors and a polyethylene moisture barrier. For export, we offer ISPM‑15 compliant wooden pallets and stretch‑film wrapping.
What is the typical production lead time?
Lead time ranges from 4 to 6 weeks for standard configurations, depending on component availability and order volume. Custom finishes or control modules may extend this period.
Contact for Technical Inquiry
To discuss application‑specific requirements, request CAD files, or arrange a sample evaluation, please reach out via the contact form. Our engineering team will respond with detailed specifications, compatibility checks, and pricing within one business day.
Submit Inquiry
