Direct Factory Wall Hung Toilet with Bidet Seat Combo

This unit combines a wall‑mounted vitreous china toilet with an integrated bidet seat, manufactured directly at the factory to eliminate intermediate handling. The design reduces floor‑space requirements by mounting the bowl onto a concealed steel frame, while the bidet functionality provides posterior and feminine wash options with adjustable water temperature and pressure.

Specification	Typical Value
Bowl Material	Vitreous china, glaze thickness ≥0.8 mm
Flush Type	Siphon jet, dual‑flush (3 L/4.8 L)
Flush Volume	3 L (low) / 4.8 L (full) per flush
Water Inlet Pressure	0.1–0.5 MPa (dynamic)
Bidet Nozzle Count	2 (posterior, feminine)
Spray Pressure Range	0.2–0.6 MPa
Seat Heating Range	30–40 °C, adjustable in 1 °C steps
Power Consumption	Seat heating 45 W, pump 5 W, standby <1 W
Overall Dimensions (W×D×H)	360 mm × 540 mm × 340 mm (bowl)
Mounting Height Range	400–500 mm from finished floor (adjustable frame)
Net Weight	28 kg (bowl) + 4.5 kg (seat)
Electrical Rating	220–240 V AC, 50/60 Hz, 0.2 A

The vitreous china bowl is formed from a silica‑based clay body fired at >1240 °C, resulting in low porosity (<0.5 %) and high chemical resistance. A clear glaze layer of at least 0.8 mm thickness provides a non‑porous, easy‑to‑clean surface that resists staining and microbial growth.

Design considerations include a concealed steel mounting frame rated for 150 kg static load, allowing height adjustment within a 100 mm range to accommodate ADA‑compliant installations. The seat features an ergonomic contour with a 450 mm width and a tapered front edge to reduce pressure points, while the bidet nozzles are positioned 70 mm above the bowl rim for optimal spray coverage.

Performance testing shows a MaP (Maximum Performance) flush score of 600 g with the 4.8 L setting, confirming effective waste removal while using 20 % less water than a standard 6 L flush. The bidet system delivers a wash coverage area of at least 150 cm² per cycle, with temperature stability maintained within ±1 °C of the set point during continuous use.

Typical installations include high‑traffic commercial restrooms, healthcare facility patient rooms, boutique hotels, and premium residential projects where space efficiency and hygiene are priorities. The wall‑hung configuration frees floor area for easier cleaning and reduces the risk of water damage from floor‑mounted fixtures.

Commercial office buildings – reduces janitorial time by eliminating floor‑mounted bases.
Hospitals and clinics – touch‑free bidet operation supports infection control protocols.
Luxury hotels – provides premium guest experience with adjustable wash and heated seat.
High‑end apartments – meets modern design aesthetics while conserving water.

Quality verification at the factory includes a hydrostatic leak test at 0.6 MPa for 5 minutes, a flush performance validation using MaP methodology, a bidet nozzle endurance test of 150 000 cycles, glaze adhesion assessment via ASTM C482, and an electrical safety check per IEC 60335‑2‑60.

Optional configurations allow tailoring to project requirements: seat colors (white, beige, gray), nozzle types (oscillating, pulsating, dual‑function), flush valve choices (single‑flush, dual‑flush with water‑saving mode), mounting frame materials (galvanized steel or aluminum alloy), control interfaces (touch‑pad side panel, wireless remote, or integrated wall panel), and added features such as UV‑sterilization nozzle, active carbon deodorizer, and night‑light illumination.

FAQ

Can the bowl dimensions be customized? The bowl footprint is fixed to maintain structural integrity; however, the mounting frame can be adjusted to alter the installed height and projection from the wall.

What information is required before quotation? Project details such as required flush volume, seat heating preference, nozzle type, mounting frame material, and any optional features (e.g., UV sterilizer) enable an accurate quote.

What materials are available for the seat? The seat is standard polypropylene with an antimicrobial additive; alternative materials such as ABS with UV‑stabilizer are available upon request.

How is quality inspected? Each unit undergoes leak testing, flush performance validation, nozzle cycle testing, glaze adhesion verification, and electrical safety inspection before packaging.

What packaging methods are available for export? Units are packed in double‑wall corrugated cartons with corner protectors, foam edge guards, and a moisture‑barrier inner bag; palletization and container loading follow ISPM‑15 standards.