Direct Factory Wall Hung Round Toilet

The wall hung round toilet is designed for environments where floor space is limited and sanitation standards are strict. Its concealed cistern and rim‑free bowl reduce crevices that can harbor bacteria, supporting hygienic maintenance in factories, laboratories, and food‑processing areas. Mounting the unit to a reinforced wall panel transfers load to the building structure, eliminating the need for a floor‑mounted pedestal.

Technical Specifications

Parameter	Typical Value	Notes
Overall Dimensions (W×D×H)	360 mm × 540 mm × 340 mm	Compact footprint for tight installations
Bowl Height (from finished floor)	460 mm ± 5 mm	Ergonomic sitting height per ISO 9241‑5
Flush Volume	4.5 L / 3 L dual‑flush	Meets water‑saving standards (≤6 L per full flush)
Load Capacity	400 kg static	Tested with reinforced wall brackets
Material – Vitreous China	ASTM C1028 compliant	Low porosity, chemical resistant

Material Construction

The bowl and tank are formed from high‑fire vitreous china, fired above 1240 °C to achieve a non‑porous surface that resists staining and chemical attack from industrial cleaners. Internal fittings—including the flush valve, fill valve, and trap—are constructed from corrosion‑resistant brass with PTFE seals, ensuring consistent performance under fluctuating water pressures common in plant utilities.

Design and Ergonomics

A rim‑free bowl eliminates hidden areas where waste can accumulate, simplifying cleaning cycles and reducing the risk of biofilm formation. The seat mounting holes are spaced at 155 mm centers, compatible with standard industrial toilet seats that feature antimicrobial polypropylene covers. The concealed cistern is accessed via a front‑panel service hatch, allowing maintenance without removing the unit from the wall.

Applications in Industrial Facilities

In manufacturing plants, the wall hung configuration frees floor space for conveyor systems, pallet jacks, or automated guided vehicles, improving workflow efficiency. Laboratories benefit from the seamless surfaces that withstand frequent disinfection with alcohol‑based solutions. Food‑processing zones appreciate the easy‑to‑clean design that supports HACCP compliance by minimizing harborage points for pathogens.

• Assembly lines where floor clearance is critical
• Cleanrooms requiring ISO‑class surface integrity
• Maintenance facilities with heavy‑duty washdown protocols

Quality Assurance and Testing

Each unit undergoes a hydrostatic pressure test at 1.5 times working pressure to verify leak‑free performance of the cistern and trap. Surface hardness is measured using a Mohs scale test, targeting a value of 6 or higher to ensure resistance to abrasive cleaning pads. Dimensional inspection is performed on a CMM with a tolerance of ±0.5 mm on critical mounting points, guaranteeing repeatable fit across production batches.

Customization Options

Customers can specify alternative flush volumes (e.g., 3 L/2 L dual‑flush) to match regional water‑conservation regulations. Seat color and material—such as stainless‑steel reinforced polypropylene or antimicrobial urea‑formaldehyde—can be adjusted upon request. For corrosive environments, an optional vitreous china coating with enhanced acid resistance is available.

• Flush mechanism: pressure‑assist or gravity‑fed
• Wall bracket finishes: galvanized steel or powder‑coated aluminum
• Accessory packs: concealed sensor‑activated flushing, leg‑rest grips

Frequently Asked Questions

Ready to Discuss Your Specification?

Submit your project requirements through the form below and our application engineers will respond with a detailed technical proposal, including drawings, material certificates, and lead‑time estimates.

Request Technical Quote