Direct Factory Wall Hung Bidet Toilet
Direct Factory Wall Hung Bidet Toilet
Product Overview
A wall‑mounted bidet toilet combines the toilet and bidet functions in a single ceramic unit that is fixed to a concealed support frame. The design eliminates the floor‑standing base, freeing floor space and simplifying cleaning in commercial restrooms.
Key Technical Specifications
| Parameter | Typical Value |
|---|---|
| Overall height (including seat) | 380 mm |
| Bowl width | 360 mm |
| Flush volume (dual‑flush) | 3 L / 6 L |
| Water inlet pressure | 0.1 – 0.5 MPa |
| Load capacity (static) | 400 kg |
| Bidet nozzle spray pressure | 0.2 – 0.4 MPa |
Materials and Construction
The fixture is made from vitreous china with a minimum thickness of 8 mm in the bowl walls, providing resistance to impact and thermal shock. A high‑gloss, antimicrobial glaze is applied and fired at 1240 °C to achieve a surface hardness of ≥6 Mohs, reducing bacterial adhesion and simplifying disinfection.
Design Features
- Concealed steel frame with adjustable brackets accommodates wall studs spaced at 400 mm or 600 mm centers.
- Integrated bidet nozzle with self‑cleaning function and adjustable spray angle (0°‑30°).
- Dual‑flush mechanism operated by a pneumatic push‑button, allowing 3 L (low) or 6 L (full) flush selection.
- Soft‑close seat and lid manufactured from polypropylene with a damping rate of 0.4 s to prevent slamming.
- Optional UV‑LED sterilization module that delivers 2 mJ/cm² UV‑C dose per cycle.
Installation Requirements
The unit requires a load‑bearing wall capable of supporting a static load of at least 250 kg per mounting point. Rough‑in dimensions call for a 150 mm vertical offset from the finished floor to the center of the waste outlet, with a 100 mm horizontal clearance for the water supply line. All connections use ½‑inch NPT threaded fittings for water and a 100 mm PVC waste pipe.
Typical Applications
In high‑traffic environments such as airports, hospitals, and hotels, the wall‑hung configuration reduces floor‑borne contaminants and speeds up cleaning cycles. The integrated bidet function satisfies hygiene standards for patient care facilities while reducing toilet paper consumption by an estimated 30 %.
Quality Control and Testing
Each unit undergoes a hydrostatic leak test at 0.6 MPa for 5 minutes, a glaze adhesion test according to ISO 10545‑12, and a load‑deflection test where a 250 kg static load is applied for 10 seconds with permissible deformation ≤0.5 mm. Functional verification includes bidet nozzle flow rate measurement (±5 % tolerance) and flush cycle endurance of 200 000 actuations.
Customization Options
| Option | Available Choices |
|---|---|
| Seat material | Polypropylene (standard), urea‑formaldehyde (antibacterial), bamboo‑filled composite |
| Flush actuator | Pneumatic push‑button, touch‑less infrared sensor, manual lever |
| Bidet nozzle type | Single‑stream, dual‑stream (posterior + feminine), pulsating massage |
| Color finish | White (RAL 9003), ivory, matte black, custom RAL upon request |
| Additional modules | UV‑LED sterilization, heated seat, air dryer, night‑light LED |
Frequently Asked Questions
Can the mounting frame be adjusted for different wall thicknesses?
Yes, the steel frame includes sliding brackets that accommodate wall thicknesses from 100 mm to 200 mm, with adjustable depth bolts allowing up to 30 mm of vertical offset.
What water pressure range is required for reliable bidet operation?
The bidet nozzle functions optimally between 0.15 MPa and 0.4 MPa; external pressure‑reducing valves are recommended if supply pressure exceeds 0.5 MPa.
Are spare parts such as nozzles and seals available for purchase?
All wear‑items, including nozzle assemblies, silicone seals, and flush valves, are stocked as standard spare parts and can be ordered with a lead time of 7‑10 working days.
Contact for Quotation
To discuss project‑specific requirements, request a detailed quotation, or arrange sample evaluation, please use the link below.
Request a quotation
