Buy Wall Hung Cloakroom Toilet
Wall Hung Cloakroom Toilet – Technical Specification
A wall hung cloakroom toilet is a sanitary fixture where the bowl is suspended from a concealed frame, leaving the floor clear beneath. This configuration reduces the footprint to the projection of the bowl from the wall, typically ranging from 480 mm to 560 mm, and allows easy cleaning of the floor area. In cloakroom settings where floor space is limited, the wall‑hung arrangement provides both functional clearance and a modern aesthetic.
Design & Dimensions
Key dimensions include the overall height from the finished floor to the top of the seat, the width of the bowl at its widest point, and the projection measured from the wall to the front rim. Typical values for a standard cloakroom model are: seat height 440 mm (±5 mm), bowl width 360 mm, projection 520 mm, and overall height 820 mm (including concealed cistern). These dimensions satisfy EN 997 class 1 requirements for wall‑mounted water closets.
Materials & Construction
The bowl is manufactured from vitreous china with a water absorption rate below 0.5 % after 24 h immersion, ensuring resistance to staining and bacterial growth. The glaze thickness averages 0.15 mm, providing a hard, impervious surface that withstands cleaning agents with pH up to 11. The concealed frame is formed from cold‑rolled steel, powder‑coated to a thickness of 80 µm, and tested to a static load of 400 kg without permanent deformation.
Flushing Performance
Most wall hung cloakroom toilets offer a dual‑flush mechanism with selectable volumes of 3 L (reduced) and 6 L (full) per flush, measured according to ISO 9001‑referenced test procedures. The flush valve operates at a minimum pressure of 0.1 MPa, delivering a jet velocity that achieves a minimum flush performance of 350 g of solid waste removal in a single full flush. Water consumption can be further reduced to 2.5 L/flush with optional low‑flow inserts, subject to local regulations.
Installation & Mounting
Installation requires a load‑bearing frame fixed to the structural wall or floor studs, capable of supporting the combined weight of bowl, cistern, and user loads. The frame includes adjustable brackets that allow vertical positioning of the bowl within a ±15 mm range to accommodate varying floor finishes. Fixing points are rated for M10 bolts with a torque of 25 Nm, ensuring a secure connection that meets EN 14688 safety factors.
Applications
Because the bowl protrudes only slightly from the wall, the fixture is ideal for cloakrooms, small en‑suite bathrooms, and accessibility‑focused restrooms where clear floor space aids wheelchair maneuverability. The reduced projection also minimizes the risk of impact in high‑traffic corridors, making the toilet suitable for hotels, office buildings, and retail environments where hygiene and space efficiency are priorities.
| Parameter | Typical Value |
|---|---|
| Seat Height (adjustable) | 440 mm ±5 mm |
| Bowl Width | 360 mm |
| Projection from Wall | 520 mm |
| Overall Height (incl. cistern) | 820 mm |
| Water Consumption (dual flush) | 3 L / 6 L |
| Maximum Static Load (frame) | 400 kg |
| Material – Bowl | Vitreous china |
| Glaze Thickness | 0.15 mm |
| Frame Coating Thickness | 80 µm powder coat |
| Flush Valve Minimum Pressure | 0.1 MPa |
Frequently Asked Questions
Q: Can the seat height be adjusted to meet accessibility requirements?
A: Yes. The concealed frame includes vertical adjustment brackets that allow the bowl to be set between 425 mm and 455 mm from the finished floor, complying with ADA and EN 17210 guidelines for accessible water closets.
Q: What information is required to obtain a quotation for a custom‑size bowl?
A: To prepare a quote we need the desired projection (mm), bowl width (mm), seat height (mm), flush volume preference (dual‑flush or single‑flush), and any special glaze or colour specifications. Providing the rough‑in dimensions of the wall studs ensures the frame can be designed accordingly.
Q: Which materials are available for the bowl and frame?
A: Bowls are supplied in standard vitreous china; optional antimicrobial glaze or coloured finishes are available upon request. Frames are constructed from cold‑rolled steel with powder‑coat finish; stainless‑steel grades (304 or 316) can be supplied for corrosive environments.
Q: How is quality inspected before shipment?
A: Each bowl undergoes dimensional inspection (CMM) to verify tolerances within ±2 mm, glaze adhesion testing (tape test) to ensure ≥4B rating, and hydrostatic pressure test at 0.5 MPa for 5 min. Frame assemblies are load‑tested to 400 kg and checked for coating thickness via magnetic induction.
Q: What packaging methods are used for export shipments?
A: Bowls are packed in double‑wall corrugated cartons with internal foam edge protectors; frames are wrapped in polyethylene film and placed in wooden pallets with corner brackets. All packages meet ISTA 3A standards for vibration and shock resistance.
Q: What is the typical production lead time?
A: Standard models ship within 3‑4 weeks after receipt of purchase order; custom‑size or special‑finish orders require 5‑6 weeks, depending on tooling and material availability.
Q: How are samples arranged for evaluation?
A: Sample units can be dispatched via express courier; the customer covers freight charges, and a refundable sample fee is applied, which is credited toward the first production order.
Contact for Quotation
To discuss your specific cloakroom toilet requirements, request a detailed quotation, or obtain CAD files for integration into your project drawings, please use the link below.
