Buy Gold Wall Hung Toilet
Gold Wall Hung Toilet
This fixture combines a vitreous china bowl with a concealed steel frame designed for wall‑mount installation, providing a clear floor space and a load rating suitable for commercial restrooms.
Design and Construction
The bowl is manufactured from sanitary grade vitreous china with a water absorption rate below 0.5% per ASTM C1027, ensuring stain resistance and long‑term durability.
A concealed carrier frame made of cold‑rolled steel, powder‑coated to a minimum thickness of 80 µm, supports static loads up to 400 kg as verified by EN 997 testing.
Technical Specifications
| Parameter | Typical Value | Unit |
|---|---|---|
| Bowl material | Vitreous china | – |
| Water consumption (full flush) | 6.0 | L |
| Water consumption (reduced flush) | 3.0 | L |
| Mounting height (finished floor to rim) | 350–380 | mm |
| Load rating (frame) | 400 | kg |
| Surface finish | Gold PVD coating | µm thickness 0.5–1.0 |
Materials and Finish
The gold appearance is achieved through a physical vapor deposition (PVD) process that deposits a titanium nitride‑based alloy layer, providing a hardness of approximately 1800 HV and corrosion resistance exceeding 500 hours in neutral salt spray (ASTM B117).
Underlying vitreous china is formulated with a low‑iron composition to minimize color shift after coating, and the glaze is fired at 1240 °C to achieve a closed pore structure.
Installation Considerations
Wall mounting requires a load‑bearing stud or concrete backing capable of resisting shear forces; the carrier includes adjustable brackets that accommodate wall thicknesses from 100 mm to 200 mm.
Inlet water connection uses a ½‑inch BSP thread with a recommended supply pressure between 0.1 MPa and 0.5 MPa; a concealed cistern with dual‑flush mechanism is typically paired.
- Use corrosion‑resistant fixings (stainless steel grade 304) for the frame to wall interface.
- Ensure the waste outlet aligns with a 100 mm PVC trap to maintain proper venting.
- Apply silicone sealant rated for continuous water exposure at the bowl‑to‑wall junction.
Applications
Gold wall hung toilets are selected where aesthetic impact and hygiene are both priorities, such as boutique hotels, high‑end office lobbies, and premium healthcare facilities.
The concealed cistern reduces visual clutter, while the elevated bowl facilitates easier floor cleaning, lowering labor costs in environments with frequent sanitation cycles.
- Luxury hotel guest rooms – provides a premium impression and simplifies housekeeping.
- Corporate executive washrooms – supports brand image with distinctive finish.
- High‑traffic retail restrooms – durable frame withstands repeated use.
Quality Assurance
Each batch undergoes dimensional inspection using coordinate measuring machines (CMM) with a tolerance of ±0.5 mm on critical mounting points.
Finish adhesion is verified by cross‑hatch tape test per ASTM D3359, requiring a minimum rating of 4B.
Functional testing includes flush volume verification and leak detection under 0.6 MPa pressure for 10 minutes.
Customization Options
While the standard offering features a 0.8 µm gold PVD layer, alternative coating thicknesses (0.5 µm to 1.5 µm) can be specified to match project durability budgets.
The carrier frame length can be adjusted in 25 mm increments to suit varying wall stud spacing, and the inlet connector orientation (left or right hand) is selectable.
- Optional anti‑microbial glaze additive (silver‑ion) for healthcare settings.
- Choice of flush plate materials: stainless steel, brushed nickel, or matching gold finish.
- Custom logo laser‑etched on the flush plate upon request.
Frequently Asked Questions
A: The steel carrier is rated for 400 kg static load, suitable for most commercial installations.
A: Minor surface scratches can be polished with a non‑abrasive PVD‑compatible compound; deep damage requires re‑coating, which is offered as a service.
A: Project location, required quantity, desired coating thickness, flush plate preference, and any special certification needs (e.g., WRAS, CE).
