Best Integrated Bidet Toilet Supplier
Best Integrated Bidet Toilet Supplier
An integrated bidet toilet combines a vitreous china bowl with electronic bidet functionality, eliminating the need for separate fixtures. The unit houses a concealed water supply, heated seat, adjustable nozzle, and drying system within a single porcelain chassis.
Procurement engineers evaluate this product for water‑efficiency, hygiene compliance, and ease of installation in commercial restrooms, healthcare facilities, and high‑end hospitality projects.
Design Features
The bowl follows a siphonic jet flush geometry with a 3‑inch trapway, achieving a MaP score of 800 g. The bidet module is mounted behind the rim, protecting nozzles from direct splash and simplifying cleaning.
Seat heating uses a PTC element with a temperature range of 30 °C to 40 °C, adjustable in 1 °C increments via a capacitive touch panel.
Flushing System
Dual‑flush options deliver 1.28 gpf (4.8 L) for low‑volume and 1.6 gpf (6.0 L) for full‑volume cycles, meeting ASME A112.19.2/CSA B45.1 standards.
A quiet‑fill valve reduces inlet noise to below 55 dB(A) at 60 psi supply pressure, suitable for noise‑sensitive environments.
Bidet Functionality
Two stainless‑steel nozzles provide posterior and feminine wash modes, each with independent pressure control from 0.2 bar to 0.6 bar.
Oscillating and pulsating spray patterns are selectable, with a self‑cleaning rinse cycle that activates after each use.
Warm air drying operates at 40 °C to 50 °C airflow, adjustable across three intensity levels.
Materials and Finishes
The bowl is vitreous china with a glazed surface hardness of 6 Mohs, resistant to staining and chemical cleaners.
Seat and lid are made of polypropylene reinforced with glass fiber, offering impact resistance > 30 J and UV stability for indoor use.
Typical Specifications
| Parameter | Typical Value |
|---|---|
| Overall Dimensions (L×W×H) | 700 mm × 380 mm × 460 mm |
| Flush Volume (Low/High) | 1.28 gpf / 1.6 gpf (4.8 L / 6.0 L) |
| Water Supply Pressure | 0.15 MPa – 0.55 MPa (22 psi – 80 psi) |
| Power Consumption (Standby/Operation) | 2 W / 45 W |
| Seat Heating Range | 30 °C – 40 °C |
| Nozzle Position Adjustment | ±10 mm longitudinal, ±5 mm lateral |
| Air Dry Temperature | 40 °C – 50 °C |
Applications
- Healthcare facilities – reduces cross‑contamination risk by eliminating manual wiping.
- Hospitality suites – provides premium guest experience with adjustable hygiene settings.
- Corporate restrooms – supports sustainability goals through low‑flow flushing and reduced paper usage.
- Educational institutions – durable construction withstands high traffic and frequent cleaning cycles.
Quality Assurance
Each unit undergoes a hydrostatic pressure test at 0.8 MPa for 5 minutes to verify leak‑free seals.
Electronic components are rated IPX4 for splash resistance and undergo 48‑hour humidity cycling at 85 % RH.
Final inspection includes functional verification of all wash, dry, and heating cycles, with a pass‑fail criterion of < 2 % deviation from set parameters.
Customization Options
Seat color can be matched to project palettes using PP‑GF compound with custom pigment loading (minimum order 500 units).
Nozzle tip geometry is adjustable for specific wash patterns; alternative materials (e.g., medical‑grade silicone) are available upon request.
Control panel layout can be relocated to the side wall for ADA‑compliant reach ranges, with corresponding wiring harness length options.
