B2B Free Standing Toilet Wholesale
Free Standing Toilet for B2B Wholesale
This unit is a floor‑mounted, pedestal‑type sanitary fixture designed for installation without wall support. The structure relies on a concealed steel frame and a vitrified china bowl that transfers load directly to the finished floor.
Typical overall dimensions are 380 mm width, 660 mm depth, and 820 mm height from finished floor to rim. The bowl interior radius is 180 mm, providing a seated clearance of 460 mm from the front edge to the trapway.
Water consumption is controlled by a dual‑flush valve offering 3 L for reduced flush and 6 L for full flush, compliant with ISO 30500. The flush mechanism operates at a minimum inlet pressure of 0.1 MPa and closes within 0.4 s after activation.
Design and Construction Details
The pedestal consists of a 2 mm thick hot‑dip galvanized steel tube shaped to a rectangular profile 70 mm × 40 mm, welded to a base plate that distributes load over a 150 mm × 150 mm area. The steel frame is powder‑coated with a 60 µm epoxy layer to resist corrosion in humid environments.
The vitreous china body is formed by slip casting, fired at 1240 °C, resulting in a water absorption rate below 0.5 % and a surface hardness of 6 Mohs. Glaze thickness averages 0.15 mm, providing a smooth finish that inhibits bacterial adhesion.
An integrated P‑trap with a 50 mm seal depth prevents odor release while maintaining a minimum flow rate of 0.25 L/s during flush. The trap is accessible via a removable inspection cover secured with stainless‑steel tamper‑proof screws.
Material Options and Customization
Standard construction uses vitreous china for the bowl and tank lid, with optional upgrades to antimicrobial glaze or a solid surface acrylic shell for high‑traffic healthcare settings.
The pedestal frame can be supplied in stainless steel grade 304 (1.4301) for environments requiring chloride resistance, or in coated carbon steel for cost‑sensitive projects. Finish choices include matte black, brushed nickel, or custom RAL colors upon request.
Flushing hardware is interchangeable between pneumatic, electronic sensor, or manual lever actuators. Tank volume can be adjusted from 4 L to 9 L by varying the internal float geometry, allowing adaptation to local water‑saving regulations.
Performance Specifications
| Parameter | Typical Value | Notes |
|---|---|---|
| Static Load Capacity | 400 kg | Tested per EN 997 with safety factor 1.5 |
| Flush Volume (Dual) | 3 L / 6 L | Adjustable via float height |
| Water Seal Depth | 50 mm | Meets ASME A112.19.2 |
| Operating Pressure Range | 0.1 – 0.5 MPa | Inlet pressure for reliable valve closure |
| Surface Roughness (Glaze) | Ra ≤ 0.4 µm | Facilitates easy cleaning |
Typical Applications
Free standing toilets are selected when structural walls cannot support concealed cisterns or when rapid retrofitting is required in existing buildings.
- Renovation of historic load‑bearing masonry walls where drilling is prohibited.
- Modular construction sites where prefabricated bathroom pods are delivered with integrated plumbing.
- High‑capacity public facilities such as transportation terminals, stadiums, and amusement parks requiring floor‑mounted fixtures for ease of maintenance.
In each case the pedestal design transfers load to the floor slab, eliminating reliance on wall studs or concrete backing, which simplifies installation and reduces structural assessment effort.
Quality Control and Testing
Each production lot undergoes dimensional verification using CMM scanning with a tolerance of ±0.5 mm on critical mounting interfaces.
Hydrostatic pressure testing of the flush valve and tank is performed at 0.6 MPa for 5 minutes to confirm leak‑free performance.
Impact resistance of the vitreous china is evaluated by dropping a 2 kg steel ball from a height of 1 m onto the bowl rim; no cracking is accepted.
Final visual inspection checks for glaze uniformity, color consistency, and absence of pinholes under 500 lux illumination.
Packaging and Shipping
Units are packed in double‑wall corrugated cartons with internal foam corner protectors. The pedestal frame is secured with steel straps, while the bowl and tank are separated by a corrugated divider to prevent contact damage.
Standard pallet configuration holds 12 pieces per pallet (1.2 m × 1.0 m base), shrink‑wrapped and labeled with handling instructions. Export shipments comply with ISPM‑15 wood‑packaging regulations when wooden pallets are used.
Lead time for standard configurations is typically 3‑4 weeks after receipt of purchase order, with expedited options available for projects requiring delivery within 10 working days.
Frequently Asked Questions
Can the bowl dimensions be customized?
Yes. The bowl length, width, and height can be adjusted in 10 mm increments to match specific ergonomic or spatial requirements. Custom tooling costs and lead time will be provided upon request.
What information is needed for a quotation?
Project location, required quantity, desired flush mechanism (manual, sensor, pneumatic), material preference for pedestal (carbon steel, stainless steel, custom finish), and any regulatory standards (e.g., ADA, EN 997) that must be met.
How is product quality verified before shipment?
Each batch receives a factory test report that includes dimensional inspection, hydrostatic test results, impact test pass/fail, and visual inspection sign‑off. Reports are available electronically with the shipping documentation.
What packaging options are available for fragile components?
In addition to standard foam protection, we offer honeycomb cardboard inserts, corner boards, and custom wooden crates for high‑vibration transport environments.
For technical data sheets, CAD models, or to discuss a custom specification for your project, please contact our sales engineering team.
