B2B European Wall Hung Toilet Fitting
European Wall Hung Toilet Fitting for B2B Applications
The fitting provides a concealed, load‑bearing interface between a wall‑mounted toilet pan and the structural wall, enabling floor‑clear installation that simplifies cleaning and optimizes space in high‑traffic restrooms. It transfers the static load of the fixture to the building substrate through a stainless‑steel bracket system designed for repeated dynamic cycles.
Typical installations occur in commercial settings where hygiene, durability, and ease of maintenance are critical design criteria, such as hotels, office complexes, and public transportation terminals.
Key Technical Specifications
| Parameter | Typical Value | Unit | Notes |
|---|---|---|---|
| Material (standard) | Stainless steel 304 | – | Optional 316 for chloride‑rich environments |
| Plate thickness | 2.5 | mm | Nominal, tolerances ±0.1 mm |
| Static load capacity | 400 | kg | Verified by quasi‑static test per EN 997 |
| Adjustable height range | 0‑150 | mm | Via slotted mounting slots |
| Hole pattern | ISO 1150‑1 | – | Compatible with standard WC pans |
| Corrosion resistance | 500 | h (salt spray) | ASTM B117, passivated finish |
| Surface finish | Brushed satin | – | Ra ≤ 0.8 µm |
| Unit weight | 1.2 | kg | Excluding fixing hardware |
Material Selection and Corrosion Resistance
The base fitting utilizes austenitic stainless steel grade 304, offering a balanced combination of tensile strength (≥ 520 MPa) and resistance to atmospheric oxidation. In environments exposed to cleaning agents containing chlorides or coastal atmospheres, grade 316 is available upon request, providing enhanced pitting resistance due to increased molybdenum content.
All surfaces undergo a passivation bath followed by a brushed satin finish, which not only meets aesthetic requirements but also reduces surface roughness to inhibit bacterial adhesion and facilitate routine disinfection.
Design Features for Easy Installation
Installation relies on a two‑part bracket system: a wall‑fixed plate with elongated slots and a toilet‑pan mounting plate that engages via adjustable bolts. The slot geometry permits vertical adjustment without removing the fixed plate, allowing alignment tolerance of up to ±10 mm to accommodate uneven wall substrates.
Concealed fixings are achieved through low‑profile caps that snap over bolt heads, preserving the smooth appearance of the wall‑mounted fixture while providing tamper‑resistant access when required.
Typical Applications in Commercial Environments
Wall‑hung toilet fittings are selected where floor space must remain unobstructed for cleaning robots or where a minimalist aesthetic is dictated by interior design briefs. The concealed mounting reduces the number of visible joints, decreasing potential harborage points for pathogens and simplifying maintenance protocols.
- Luxury hotels and resorts
- Corporate office headquarters
- Healthcare facilities and clinics
- Educational institutions
- Airport and railway terminals
Quality Control and Testing
Dimensional verification is performed on a coordinate measuring machine (CMM) with a tolerance of ±0.05 mm on critical hole positions and plate thickness. Each batch undergoes a static load test where a calibrated force of 450 kg is applied for five minutes; permanent deformation must remain below 0.2 mm.
Surface finish is assessed using a profilometer to ensure Ra values do not exceed 0.8 µm, and salt‑spray exposure is conducted per ASTM B117 for 500 hours with no visible red rust permitted. Records of inspection results are retained for traceability and are available to customers upon request.
Customization Options
Customization begins with the selection of plate length to match specific toilet‑pan mounting centers, which can be adjusted in 10 mm increments from 180 mm to 340 mm. Finish alternatives include polished chrome, powder‑coated RAL colors, or a PVD‑treated black oxide for high‑wear applications.
- Variable hole patterns to accommodate non‑standard WC pans
- Integrated anti‑vandal lugs or security fasteners
- Pre‑drilled access holes for service conduits
- Extended height brackets for raised floor installations
Frequently Asked Questions
Can the fitting be supplied with a different stainless‑steel grade?
Yes, grade 316L is available for projects requiring superior chloride resistance; lead time and pricing are adjusted accordingly.
What information is needed to obtain a quotation?
Required details include the desired plate length, hole pattern, finish, quantity, and any special features such as anti‑vandal lugs or extended brackets.
How is the product packaged for shipment?
Each fitting is placed in a protective polyethylene sleeve, then packed in a corrugated carton with corner protectors; palletization follows ISPM 15 standards for export.
What is the typical production lead time?
Standard configurations ship within 3‑4 weeks after order confirmation; customized items may require an additional 1‑2 weeks depending on complexity.
Contact for Technical Inquiry
To request detailed drawings, material certificates, or to discuss project‑specific requirements, please use the link below.
Request Technical Data Sheet
