B2B Bidet Toilet with Warm Water and Dryer

Modern commercial restrooms require fixtures that deliver consistent hygiene performance while minimizing maintenance overhead.

This bidet toilet combines an instant‑flow water heater with a warm‑air dryer to provide a complete cleaning cycle without paper or manual intervention.

Key Technical Specifications

Parameter	Typical Value	Notes
Heating method	Instantaneous flow‑through heater	No storage tank, temperature stable within ±1 °C
Water temperature range	30 °C – 45 °C	Adjustable in 1 °C steps via digital controller
Dryer airflow	120 L/min at 25 °C	HEPA‑filtered air, noise level <55 dB(A)
Nozzle material	Medical‑grade stainless steel (316L)	Self‑cleaning with UV‑LED after each use
Power consumption	1.2 kW (peak)	Standby <0.5 W, compatible with 208‑240 V three‑phase
Mounting options	Wall‑hung or floor‑standing with concealed cistern	Adjustable brackets for 150 mm–300 mm stud spacing

Heating and Drying System

The instantaneous heater uses a ceramic PTC element that modulates power based on inlet flow rate, ensuring the outlet temperature reaches the set point within 2 seconds of activation.

A centrifugal blower draws ambient air through a HEPA filter, then passes it over a PTC heating coil to deliver warm air at the selected temperature; the dryer shuts off automatically after 30 seconds of inactivity to conserve energy.

Nozzle and Hygiene Features

The dual‑nozzle design provides separate streams for posterior and feminine washing, each with independent pressure regulation from 0.2 bar to 0.6 bar.

After each cycle, the nozzles undergo a 5‑second UV‑LED sanitation pulse followed by a self‑rinse with filtered water, reducing bacterial load by >99.9 % according to ISO 22196 testing.

Installation and Integration

The unit includes a built‑in backflow preventer and a pressure‑balancing valve, allowing direct connection to potable water lines without additional accessories.

Electrical connections are made via a waterproof IP65 rated conduit; the controller communicates with building management systems through Modbus TCP for real‑time status monitoring.

Applications in Commercial Facilities

• High‑traffic office buildings where paper waste reduction supports LEED credits.
• Healthcare facilities requiring touch‑free hygiene to minimize cross‑contamination.
• Hospitality venues aiming to enhance guest comfort while lowering laundry costs.
• Industrial plants with strict sanitation protocols for worker welfare areas.

Quality and Testing

Each toilet undergoes a 100‑cycle functional test covering heating response, dryer airflow, nozzle retraction, and leak detection before leaving the factory.

Materials are certified to NSF/ANSI 61 for potable water contact, and the electrical assembly complies with IEC 60335‑2‑96 for household‑type appliances.

Frequently Asked Questions

Can the water temperature be limited for safety regulations?

Yes, the controller includes a programmable maximum temperature lock that can be set to any value between 30 °C and 45 °C to meet local plumbing codes.

What information is required before quotation?

Project specifics such as mounting type, water pressure range, voltage supply, and any desired custom finishes are needed to generate an accurate quote.

Are alternative nozzle materials available?

Optional coatings such as titanium nitride or antimicrobial polymer can be supplied upon request for environments with aggressive water chemistry.

Call to Action

For detailed datasheets, customization options, or to arrange a factory‑approved sample, contact our technical sales team via the inquiry form.

Request Technical Consultation