White Wall Mounted Medicine Cabinet with Mirror

A wall mounted medicine cabinet with integrated mirror provides a dedicated, enclosed storage space for pharmaceuticals while allowing visual verification of product labels and user appearance. The design combines secure storage with a reflective surface to support medication safety protocols in clinical environments.

Mounting the unit on the wall conserves floor space, facilitates cleaning, and helps meet infection‑control guidelines that restrict floor‑based storage in medication rooms. The cabinet is intended for use in hospitals, outpatient clinics, long‑term care facilities, and laboratory preparation areas where rapid, uncontaminated access to medicines is required.

Construction and Materials

The cabinet body is fabricated from cold‑rolled steel with a nominal thickness of 1.2 mm, providing sufficient rigidity to resist deformation under typical load conditions. All exterior surfaces receive a white powder‑coat finish (RAL 9010) applied in a two‑stage process to achieve a minimum film thickness of 80 µm and a pencil hardness of H.

The mirror consists of 4 mm tempered glass with a silver backing and a protective polyurethane edge seal to prevent delamination. An optional anti‑fog coating can be applied, reducing surface condensation by up to 90 % under 80 % relative humidity at 25 °C. Door hinges are made from AISI 304 stainless steel, and the latch mechanism incorporates a concealed soft‑close damper rated for 50 000 cycles.

Dimensions and Mounting

Standard external dimensions are 600 mm wide × 700 mm high × 150 mm deep, yielding an internal usable depth of approximately 120 mm after accounting for the door thickness and internal shelving. The door opens to a maximum angle of 110°, allowing full visibility of the interior contents.

Mounting is accomplished via a welded steel bracket that distributes load across four M8 × 60 mm anchor bolts. The bracket is rated for a static load of 150 kg, providing a safety factor of at least 2.5 under the maximum expected load of a fully stocked cabinet. A drilling template is supplied to ensure correct hole spacing and level installation.

Mirror and Lighting Integration

The mirror delivers a reflectance of 95 % across the visible spectrum, with a typical surface flatness tolerance of ±0.1 mm over a 300 mm span. When the anti‑fog option is selected, the coating maintains a contact angle greater than 100° after 24 hours of humid exposure.

An optional LED strip can be recessed into the cabinet top, operating at 12 V DC with an IP44 rating. The strip provides a colour temperature of 4000 K, a CRI exceeding 80, and a power draw of approximately 5 W per linear foot. The LED driver is UL‑listed and includes over‑current and thermal protection.

Load Capacity and Durability

Static load testing of the fully assembled cabinet, with weight evenly distributed across the internal shelves, shows no permanent deformation at 200 kg. The door assembly has been cycle‑tested to 50 000 open‑close operations without measurable hinge wear or loss of soft‑close damping.

Impact resistance follows IEC 60068‑2‑27, withstanding a 10 J shock applied to the cabinet corner without cracking the mirror or compromising the door seal. Corrosion resistance is validated by a 500‑hour neutral salt spray test per ASTM B117, showing no red rust on the powder‑coat surface.

Customization Options

External dimensions can be adjusted in 50 mm increments for width and height, and depth can be varied between 120 mm and 200 mm to accommodate specific shelving or equipment needs. The powder‑coat finish is available in alternative RAL colours or with an antimicrobial additive that reduces surface bacteria by 99 % within 24 hours.

Internal accessories include adjustable glass or polymer shelves, a choice of key‑operated or electronic RFID locks, and a plug‑in UV‑C module for surface disinfection. All optional components are designed to mount using the same M4 fastening system used for the standard shelves, ensuring field‑serviceability.

Typical Applications

In medication preparation rooms, the wall‑mounted cabinet places critical drugs at eye level, reducing the need for bending or reaching and thereby lowering the risk of dosing errors. The integrated mirror allows nursing staff to quickly inspect labels, check for tamper‑evident seals, and verify their own appearance before entering sterile zones, supporting both medication safety and personal hygiene protocols.

In isolation wards, the smooth, non‑porous powder‑coat surface and sealed mirror edge minimize crevices where pathogens could accumulate, facilitating routine disinfection with alcohol‑based wipes. The compact footprint also enables placement alongside existing workstations without obstructing egress paths, complying with local fire and building codes.

Quality Assurance

Every cabinet undergoes a dimensional inspection using a coordinate‑measuring machine, with tolerances of ±0.5 mm on external dimensions and ±0.2 mm on mirror flatness. Finish adhesion is verified by a cross‑hatch test per ASTM D3359, requiring a rating of 5B or better.

Mirror adhesion to the substrate is measured via a pull‑off test (ASTM D4541), with a minimum acceptable value of 1.5 MPa. Electrical options are subjected to dielectric strength testing at 1500 V AC for one minute, and the completed assembly passes an IP44 ingress test using a calibrated spray nozzle. Final packaging is subjected to a 1.2 m drop test on all corners to ensure no damage occurs during transit.

Technical Data

Frequently Asked Questions

Can the cabinet dimensions be customized?

Yes. Width and height can be adjusted in 50 mm increments, and depth can be varied between 120 mm and 200 mm to suit specific storage or equipment requirements. Custom sizes are quoted based on the required material cut‑offs and any additional reinforcement needed.

What mirror options are available?

The standard mirror is 4 mm tempered glass with a silver backing and polyurethane edge seal. An anti‑fog coating can be applied upon request, and a low‑iron variant offering higher reflectance is also available for specialized lighting environments.

How is the unit secured to the wall?

Installation uses a welded steel bracket with four M8 × 60 mm anchor bolts. A drilling template is provided to ensure correct hole spacing and level mounting. The bracket is rated for a static load of 150 kg, providing ample safety factor for typical medication loads.

Contact for Quotation

To obtain a detailed quotation, including lead time, packaging options, and any required certifications, please reach out to our technical sales team. Provide the desired dimensions, finish preference, and any optional features such as lighting, locking, or antimicrobial coating.