White Wall Mounted Corner Bathroom Cabinet
White Wall-Mounted Corner Bathroom Cabinet
This cabinet is engineered for installation in the 90‑degree junction of two walls, providing storage without encroaching on floor space. Its geometry allows efficient use of otherwise unused corners in restrooms, locker rooms, and healthcare facilities.
Design Overview
The unit consists of a single rectangular back panel that mounts directly to studs or solid substrate, two side panels that meet at a 45‑degree miter to form the corner, and a top panel that creates a flush surface. All edges are eased to a 1‑mm radius to reduce snag points and facilitate cleaning.
Materials and Construction
Core panels are fabricated from 18‑mm thick, moisture‑resistant medium density fiberboard (MDF) with a density of 700 kg/m³. Surfaces are coated with a UV‑cured polyester finish that yields a reflectance of 85 % in the visible spectrum and resists staining from common bathroom chemicals. Hardware includes stainless‑steel (grade 304) cam locks and concealed mounting brackets rated for a shear load of 150 N per fastener.
| Component | Material | Key Property |
|---|---|---|
| Panel core | MDF | Density 700 kg/m³, thickness 18 mm |
| Surface finish | UV‑cured polyester | Reflectance 85 %, chemical resistance rating EN 12720 |
| Mounting hardware | Stainless steel 304 | Shear capacity 150 N per fastener |
Dimensions and Load Capacity
Standard overall footprint measures 400 mm wide on each wall, 300 mm high, and 200 mm deep. The interior shelf provides a clear opening of 350 mm × 350 mm with a usable depth of 180 mm. When loaded with typical toiletries (estimated 5 kg), deflection at the shelf centre remains under 0.3 mm, verified by finite‑element analysis under a safety factor of 2.
| Parameter | Value | Condition |
|---|---|---|
| Width (each side) | 400 mm | Nominal |
| Height | 300 mm | Nominal |
| Depth | 200 mm | Nominal |
| Shelf load capacity | 10 kg | Uniformly distributed |
Installation and Mounting
Mounting is accomplished via two concealed brackets that engage with pre‑drilled holes in the back panel. Each bracket utilizes two M6 × 40 mm stainless‑steel screws into wood studs or metal backing, providing a combined withdrawal resistance of 300 N. A leveling shim kit (0.5 mm increments) accommodates wall irregularities up to 3 mm. Installation time for a qualified technician averages 12 minutes per unit.
Applications in Commercial and Institutional Settings
The corner configuration is advantageous in high‑traffic environments where floor space must remain unobstructed for circulation or equipment. Typical installations include hospital patient rooms (to store personal items without impeding wheelchair access), school locker rooms (to keep toiletries off wet floors), and hospitality suites (to provide discreet storage while maintaining a clean aesthetic). The white finish reflects ambient lighting, contributing to perceived brightness in spaces with limited natural light.
Quality Control and Testing
Each batch undergoes visual inspection for surface defects, dimensional verification using calibrated calipers (±0.1 mm tolerance), and adhesion testing of the coating per ASTM D3359 (cross‑hatch method). A random sample is subjected to a 48‑hour humidity soak at 40 °C/90 % RH to confirm no swelling exceeds 0.2 % thickness change. Load testing follows the procedure outlined in ANSI/BIFMA X5.1 for storage units, confirming that the unit meets the required safety factors.
Customization Options
- Alternative panel thicknesses from 16 mm to 22 mm
- Choice of melamine, laminate, or powder‑coated metal finishes
- Integrated lighting strips (LED, 12 V, IP44 rated)
- Lockable doors with cylinder or electronic access
- Adjustable shelving in 25 mm increments
Frequently Asked Questions
- Can dimensions be customized to match specific wall angles?
- Yes. The cabinet can be produced with custom miter angles ranging from 80° to 100° to accommodate non‑standard corners, subject to engineering review.
- What information is required before a quotation?
- Project‑specific dimensions, desired material finish, hardware preferences, and quantity. Rough‑in drawings or site photos expedite the process.
- How is quality inspected for bulk orders?
- Inspection includes AQL 1.0 for visual defects, dimensional sampling per ISO 2859‑1, and functional testing of hardware on a statistically significant sample.
- What packaging methods are available for export shipments?
- Standard packaging uses double‑wall corrugated cartons with corner protectors and moisture‑barrier liners. Custom crating or palletization is available upon request.
- What is the typical production lead time?
- Lead time ranges from 3 to 4 weeks for standard configurations, depending on current plant load and material availability.
Request a Quote
To discuss specifications, obtain a detailed quotation, or arrange a sample unit, please contact our technical sales team.
