Single Floating Black Bathroom Vanity with Sink

Overview

A single floating black bathroom vanity with sink is a wall‑mounted unit that combines a countertop basin with storage space while appearing to float above the floor. The mounting system transfers the load to concealed brackets anchored to wall studs or solid backing, eliminating visible legs or base cabinets. This configuration creates a clean line that simplifies floor cleaning and enhances the perception of space in compact bathrooms.

Construction & Materials

The carcass is typically built from moisture‑resistant MDF or multi‑ply plywood with a minimum thickness of 18 mm for the sides and 22 mm for the bottom panel to resist sag under load. Edges are sealed with PVC edge banding to prevent water ingress. The sink basin is often fabricated from vitreous china or solid surface acrylic, both offering non‑porous surfaces that resist staining and microbial growth.

• Car carcass: E1 grade MDF with melamine overlay or marine plywood.
• Finish: UV‑cured matte black or high‑gloss polyurethane coating, thickness ≥ 30 µm.
• Hardware: concealed zinc‑alloy brackets rated for ≥ 150 kg static load, soft‑close drawer slides with 30 mm travel.

Dimensions & Specifications

Design Features

• Integrated sink eliminates seams, reducing leak points.
• Soft‑close drawer mechanism prevents impact noise and extends slide life.
• Internal shelf with adjustable height (30 mm increments) for flexible storage.
• Ventilated back panel (6 mm gap) promotes airflow and reduces moisture buildup.
• Pre‑drilled mounting holes align with standard stud spacing (400 mm or 600 mm).

Installation Considerations

The unit requires a solid backing capable of supporting the rated load; typical installations use 2 × 4 wood studs or metal studs with appropriate anchors. A level is used to ensure the top surface is within ± 2 mm of horizontal, which is critical for proper drainage of the integrated sink. Plumbing rough‑in should position the drain outlet within 50 mm of the sink’s waste hole to avoid excessive pipe bending. All mounting hardware is supplied with corrosion‑resistant zinc plating.

Performance & Durability

Under standard bathroom conditions (20 °C, 60 % RH), the UV‑cured finish shows less than 5 % gloss loss after 500 hours of accelerated UV exposure per ISO 11507. The drawer slides endure 30,000 cycles without measurable increase in opening force, meeting BHMA Grade 1 standards. The sink basin resists thermal shock up to 110 °C, allowing safe disposal of hot water.

Applications

• Master bathrooms where a floating aesthetic creates visual openness.
• Guest bathrooms and powder rooms requiring compact footprint.
• Hospitality suites seeking a modern, easy‑to‑clean vanity solution.
• Assisted living facilities where wall‑mounted units reduce tripping hazards.

Quality Assurance

Each vanity undergoes a three‑point inspection: dimensional verification (± 1 mm tolerance), finish adhesion test (cross‑hatch per ASTM D3359), and load test (150 kg static for 5 minutes). Records are retained for traceability, and any unit failing a test is reworked or scrapped before packaging.

Customization Options

• Width, depth, and height adjustments in 10 mm increments.
• Alternative finishes: matte white, concrete grey, or wood‑grain laminate.
• Sink material upgrades to solid surface or stone resin.
• Hardware choices: brushed nickel, matte black, or chrome drawer pulls.

Frequently Asked Questions

Contact for Inquiry

To discuss technical details, request a quote, or arrange a sample, please use the inquiry form linked below.