Oem Wall Hung Bathroom Cabinet With Sink
OEM Wall Hung Bathroom Cabinet with Sink
The cabinet is designed for wall‑mounted installation in commercial restrooms, combining a vitreous china or stainless‑steel sink with a storage unit that conceals plumbing and supplies. Its primary function is to provide a hygienic, space‑saving solution that facilitates easy cleaning and maintenance while meeting ADA accessibility guidelines when configured accordingly.
Material Selection and Construction
Cabinet bodies are typically fabricated from 18‑mm moisture‑resistant MDF or marine‑grade plywood, both sealed with a UV‑cured polyurethane coating that resists water vapor and cleaning agents. Sink options include vitreous china with a glazed finish offering a non‑porous surface, or 304-grade stainless steel with a brushed texture that resists corrosion and impact.
Internal shelving uses 12‑mm tempered glass or melamine‑finished particle board, chosen based on load requirements. Edge banding is applied with PVC or ABS to prevent moisture ingress at panel joints. All hardware, including concealed brackets and soft‑close hinges, is rated for minimum 50,000 cycles.
Dimensional Range and Configuration Options
Standard widths range from 600 mm to 1200 mm in 100 mm increments, depths from 350 mm to 500 mm, and heights from 800 mm to 900 mm to accommodate varying ergonomic preferences. The sink basin can be centered, offset, or integrated as a trough, with bowl depths between 140 mm and 200 mm.
| Width (mm) | Typical Sink Configuration | Storage Volume (L) |
|---|---|---|
| 600 | Single centered basin | 12 |
| 800 | Single offset basin | 18 |
| 1000 | Double basin | 24 |
| 1200 | Trough sink | 30 |
Mounting and Installation Considerations
The unit is secured to the wall via a steel mounting rail that distributes load across at least three studs or a concrete anchor system, providing a rated static load of 150 kg. Adjustable leveling feet accommodate uneven substrates, and a concealed service panel allows access to supply lines and trap without removing the cabinet.
Plumbing rough‑in heights are standardized to 500 mm from finished floor to the center of the drain, facilitating coordination with mechanical contractors. Electrical provisions for optional LED lighting or sensor faucets are integrated via a low‑voltage conduit chase within the cabinet rear.
Typical Applications in Commercial and Institutional Settings
These cabinets are specified for high‑traffic environments such as airports, hospitals, hotels, and educational facilities where durability, ease of sanitation, and space efficiency are critical. The wall‑hung configuration eliminates floor‑based cleaning obstacles and supports barrier‑free designs when mounted at the appropriate height.
In healthcare settings, the non‑porous sink surfaces and seamless edges reduce microbial harborage, while the optional antimicrobial coating on cabinet exteriors further supports infection control protocols. For hospitality projects, integrated soft‑close drawers and premium finishes enhance guest perception of quality.
Customization Capabilities
Customers may specify alternative panel thicknesses, alternative finishes such as laminate, veneer, or powder‑coated metal, and custom cut‑outs for accessories like soap dispensers or hand dryers. Interior accessories include adjustable glass shelves, pull‑out waste bins, and lockable compartments.
- Sink material: vitreous china, 304 stainless steel, solid surface
- Cabinet finish: melamine, HPL, natural veneer, custom paint
- Hardware: soft‑close hinges, push‑to‑open, keyed locks
- Accessories: integrated LED strip, touch‑less faucet, soap dispenser
Quality Assurance and Testing
Each unit undergoes a dimensional inspection using coordinate‑measuring machines to verify tolerances of ±0.5 mm on critical interfaces. Finish adhesion is tested per ASTM D3359, and water resistance is validated through a 24‑hour submersion test with no delamination or swelling observed.
Load testing applies a dynamic force of 100 kg repeated 10,000 cycles to the mounting brackets, confirming no deformation or fastener loosening. Functional testing of soft‑close mechanisms ensures closing speed remains within 0.2 ± 0.05 seconds over the product lifecycle.
Packaging and Logistics
Cabinets are packed in double‑wall corrugated cartons with corner protectors and interior foam inserts that immobilize the sink and hardware. Each package includes a detailed installation manual, mounting template, and a set of stainless‑steel fasteners rated for the specified load.
Standard palletization accommodates 20 units per pallet for full‑truckload shipments, with optional crate packaging available for overseas destinations requiring additional impact protection. Lead times are typically 4‑6 weeks from receipt of approved drawings, subject to material availability.
Frequently Asked Questions
- Can dimensions be customized? Yes, width, depth, and height can be adjusted in 10 mm increments based on project constraints.
- What information is required before quotation? Desired overall dimensions, sink material, finish preference, hardware specifications, and any required cut‑outs for accessories.
- What materials are available for the cabinet body? Moisture‑resistant MDF, marine‑grade plywood, or optional metal framing with infill panels.
- How is quality inspected? Incoming material checks, in‑process dimensional verification, and final functional testing per internal standards.
- What packaging methods are available? Standard carton with foam protection, wooden crate for export, or palletized bulk packaging.
