Buy Ultra Slim Bathroom Cabinet 20Cm
Ultra Slim Bathroom Cabinet 20cm Depth
A 20 mm deep wall‑mounted storage unit designed for tight bathroom envelopes where clearance is limited. The cabinet integrates a concealed hinge system and a moisture‑resistant panel core to maintain dimensional stability under fluctuating humidity.
Product Overview
The cabinet’s overall depth of 20 cm includes the door, frame, and internal shelving, allowing installation in recesses as narrow as 22 cm to accommodate finishing tolerances. Interior width and height are configurable in 5 cm increments to match standard vanity layouts. All exposed edges are sealed with a PVC‑coated edge band to prevent water ingress.
Key Technical Specifications
| Parameter | Value / Range | Notes |
|---|---|---|
| Overall Depth (incl. door) | 200 mm | Measured from wall to outer door face |
| Available Widths | 400 mm – 1200 mm (50 mm steps) | Custom widths on request |
| Available Heights | 600 mm – 2000 mm (50 mm steps) | Standard heights; taller units require intermediate support |
| Panel Core Material | 18 mm moisture‑resistant MDF (MR‑MDF) | Density 680 kg/m³, thickness tolerance ±0.3 mm |
| Door Thickness | 16 mm MR‑MDF with PVC edge band | Weight ≈ 4.2 kg/m² |
| Hinge Type | Concealed soft‑close European hinge (35 mm cup) | Opening angle 110 ± 5°, cycle life >50 000 |
| Finish Options | Melamine foil, PVC laminate, or water‑based PU coating | Surface abrasion resistance (Taber) >500 cycles |
Material Construction
The carcass uses 18 mm MR‑MDF bonded with a urea‑formaldehyde resin that meets EN 120‑class E1 emission limits. Edge sealing is applied via hot‑melt PVC adhesive, delivering a continuous barrier against water vapor transmission. Interior shelves are 12 mm MR‑MDF with adjustable metal brackets allowing 25 mm vertical pitch.
Typical Applications
In renovation projects where existing plumbing or electrical conduits limit cavity depth, a 20 cm cabinet provides usable storage without requiring structural alterations. Hotels and healthcare facilities often specify this depth for guest‑room bathrooms to maintain ADA‑compliant clear floor space while still offering toiletries storage. The concealed hinge eliminates protruding hardware, reducing the risk of snagging on linens or clothing in tight corridors. Because the panel core is moisture‑resistant, the unit performs reliably in environments with relative humidity cycling between 30 % and 80 % without delamination.
Customization Options
- Width: 400 mm to 1200 mm in 50 mm increments; intermediate sizes available as special order.
- Height: 600 mm to 2000 mm in 50 mm increments; optional mid‑panel reinforcement for heights >1500 mm.
- Door finish: melamine wood grain, solid colour PVC, or matte PU paint (RAL‑matched).
- Interior accessories: adjustable glass shelves, pull‑out baskets, or integrated LED strip with IP44 rating.
- Locking mechanism: cam lock or electronic keypad (optional).
Quality Assurance
Each cabinet undergoes a dimensional check using a laser‑based CMM, verifying depth tolerance within ±0.5 mm and squareness <0.2 mm/m. Humidity conditioning cycles (24 h at 40 °C/90 % RH followed by 24 h at 20 °C/30 % RH) are performed to assess edge‑seal integrity, with no visual blistering permitted. Final inspection includes a 5 000‑cycle soft‑close hinge operation test and a 10 kg load test on shelves for deflection <1 mm.
Packaging & Logistics
Units are packed flat‑packed in triple‑wall corrugated cartons with corner protectors and internal PE foam inserts to prevent panel deformation. Each carton includes a detailed installation manual, hardware kit, and a QR code linking to the 3‑D assembly drawing. For overseas shipments, cartons are palletized and stretch‑wrapped, meeting ISPM‑15 wood‑packaging requirements.
Frequently Asked Questions
Q: Can the cabinet depth be reduced below 20 cm for tighter spaces?
A: The 20 cm depth is the minimum achievable with the current hinge and door thickness; reducing depth would require a specialty hinge redesign, which is available as a custom engineering project.
Q: What information is needed to obtain a quotation for a non‑standard width or height?
A: Provide the required clear opening width and height, wall finish type, and any desired interior accessories; our sales engineer will return a detailed quote within two business days.
Q: How is the moisture resistance of the panel core verified?
A: Core samples are subjected to ASTM D1037 swell testing; the MR‑MDF used shows less than 0.3 % thickness increase after 24 h water immersion, meeting the EN 312‑class P3 requirement.
