Buy Bathroom Storage Cabinet Wall Hung

Wall‑hung bathroom storage cabinets are mounted directly to the wall structure, eliminating floor contact and simplifying cleaning in wet environments.

Material Selection

The carcass is typically constructed from 18 mm marine‑grade plywood with a melamine‑faced surface that resists water absorption and chemical exposure from cleaning agents.

Hardware components such as hinges, brackets, and shelf pins are made from 304 stainless steel to prevent corrosion in high‑humidity conditions.

Construction Details

Panels are joined using dowel‑reinforced cam locks combined with polyurethane adhesive, providing shear strength exceeding 2.5 kN per joint under static load.

All exposed edges are sealed with 2 mm PVC edge banding that is heat‑bonded to the substrate, preventing moisture ingress and delamination.

Standard Sizes and Customization Options

Common wall‑hung cabinets are offered in widths of 600 mm, 800 mm, and 1000 mm, with a fixed height of 720 mm and depth of 200 mm, but each dimension can be adjusted in 50 mm increments to suit specific layouts.

Interior configurations include adjustable shelf pins (spacing 32 mm) and optional pull‑out trays, allowing the buyer to define storage density without altering the external envelope.

Mounting and Load Considerations

Supplied with four M8 × 80 mm stainless steel anchor bolts and a steel mounting plate that distributes load across at least two wall studs or a concrete backing.

When installed according to the supplied template, the unit safely supports a uniformly distributed load of up to 150 kg, which accommodates typical toiletries, towels, and cleaning supplies.

Why Wall‑Hung Cabinets Suit Bathroom Environments

Elevating the storage volume above the floor eliminates direct contact with standing water, reduces the risk of microbial growth on the cabinet base, and facilitates rapid floor mopping without obstruction.

Its smooth, non‑porous melamine surface can be wiped down with standard disinfectants, maintaining hygiene standards required in commercial restrooms, healthcare facilities, and high‑end residential bathrooms.

Inspection and Testing Protocol

Each finished cabinet undergoes a dimensional check (±0.5 mm tolerance), a 24‑hour humidity soak test at 90 % RH, and a pull‑out test on shelf pins to verify retention force above 150 N.

Visual inspection includes verification of edge band adhesion, surface finish uniformity, and correct hardware torque, documented in a batch‑specific quality record.

Typical Specifications

Frequently Asked Questions

• Can dimensions be customized? Yes, width, height and depth can be adjusted in 50 mm steps to match site constraints.
• What information is required before quotation? Project dimensions, desired finish, hardware preferences, and quantity.
• What materials are available? Marine‑grade plywood with melamine face; optional compact laminate or stainless‑steel cladding upon request.
• How is quality inspected? Dimensional tolerance check, humidity soak test, pull‑out force verification, and visual inspection of edges and hardware torque.
• What packaging methods are available? Flat‑pack in corrugated cardboard with corner protectors, or fully assembled in wooden crates for overseas shipments.
• How are export shipments protected? Palletized, stretch‑wrapped, and sealed with moisture‑barrier film; includes desiccant packs for humidity control.
• What is the typical production lead time? 3‑4 weeks for standard sizes; 5‑6 weeks for customized dimensions, depending on order volume.
• How are samples arranged? Sample units can be shipped via express courier; costs are credited against the first production order.

Request a Quote

Provide your project dimensions, preferred material finish, and required quantity to receive a detailed technical quotation and lead‑time estimate.