Buy 4 Drawer Bathroom Cabinet
Buy 4 Drawer Bathroom Cabinet
A four‑drawer bathroom cabinet provides vertical storage that keeps towels, toiletries and cleaning supplies within easy reach while minimizing floor footprint. The unit is engineered for humid environments, using moisture‑stable panels and corrosion‑resistant hardware to maintain dimensional stability over years of daily use.
Design and Construction
The carcass is built from 18 mm thick, moisture‑resistant MDF with a melamine‑laminated surface that resists splashing and staining. Drawer boxes are constructed from 12 mm plywood, dovetailed at the front corners for shear strength, and fitted with full‑extension ball‑bearing slides rated for 30 kg dynamic load per drawer.
Soft‑close dampers are integrated into each slide to prevent impact noise and reduce wear on the drawer front. All exposed edges are sealed with 2 mm PVC edge banding, eliminating water ingress at the panel‑edge interface.
Key Technical Specifications
| Parameter | Typical Value | Customizable Options |
|---|---|---|
| Overall Height | 800 mm | 600 mm – 1000 mm |
| Overall Width | 400 mm | 300 mm – 600 mm |
| Overall Depth | 460 mm | 350 mm – 550 mm |
| Drawer Internal Height (each) | 150 mm | Adjustable in 25 mm increments |
| Slide Type | Full‑extension ball‑bearing | Undermount soft‑close, push‑to‑open |
| Load Capacity per Drawer | 30 kg (dynamic) | Up to 50 kg with reinforced slides |
| Finish Options | White melamine, grey oak, walnut veneer | Custom laminate, PVC film, powder‑coated metal |
Material Options
- Moisture‑resistant MDF (E1 grade) with melamine laminate – standard for cost‑effective installations.
- Marine‑grade plywood (B/BB) with waterproof phenolic overlay – suited for wet‑room or spa environments.
- Stainless steel (AISI 304) frame with powder‑coated finish – provides highest corrosion resistance for coastal facilities.
- Solid wood (hard maple) with UV‑cured acrylic coating – selected for premium residential projects requiring natural grain.
Applications in Bathroom Environments
Vertical stacking of four drawers maximizes storage density in narrow bathrooms where floor space is limited. The drawer configuration allows segregation of items by frequency of use: top drawer for daily toiletries, second for towels, third for cleaning agents, bottom for spare linens. This arrangement reduces countertop clutter and improves workflow during morning routines.
Because the cabinet is mounted on adjustable legs or a wall‑hung bracket, it can be positioned to accommodate varying floor heights and to allow easy cleaning underneath. The sealed panel edges and corrosion‑resistant hardware ensure that prolonged exposure to humidity does not cause swelling, delamination, or rust formation.
Quality Control and Testing
Each unit undergoes a three‑stage inspection: (1) dimensional verification of panel cuts using CNC‑measured tolerances of ±0.5 mm; (2) slide functional test where drawers are cycled 5,000 times at full load to confirm smooth operation and retention of soft‑close damping; (3) humidity exposure test where assembled cabinets are held at 80 % RH, 30 °C for 48 hours, after which edge bonding and finish adhesion are inspected for blushing or delamination.
Documentation of test results is available upon request, providing traceability for OEM buyers who require compliance with internal quality standards or project specifications.
Customization Possibilities
- Drawer interior accessories: adjustable dividers, removable trays, or built‑in power outlets.
- Hardware upgrades: soft‑close hinges, touch‑latch mechanisms, or anti‑microbial handles.
- Dimensions: height, width, depth, and drawer count can be altered to match specific layout constraints.
- Finishes: custom colour matching, anti‑fingerprint coating, or decorative veneer overlays.
Frequently Asked Questions
- Can the cabinet be supplied pre‑assembled? Yes, units are shipped fully assembled with protective corner guards; flat‑pack options are available for volume orders.
- What information is needed for a quotation? Required details include overall dimensions, chosen material, finish, hardware specifications, and any custom accessories.
- How are export shipments protected? Cabinets are packed in double‑wall corrugated cartons with internal foam edge protectors and sealed with moisture‑barrier film to withstand transit humidity.
