Bulk Wall Hung Mirrored Tall Bathroom Cabinets

Product Overview

These cabinets are designed for high‑volume installations in commercial bathrooms, offering a vertical storage solution that combines a full‑length mirror with tall cabinetry. The wall‑mounted configuration frees floor space and facilitates cleaning in busy environments.

Each unit consists of a reinforced steel frame, a moisture‑resistant MDF core, and a tempered glass mirror bonded to the door panel. The assembly is engineered to support repeated opening cycles without sagging or misalignment.

Construction & Materials

The cabinet box uses 18 mm thick MDF with a melamine laminate finish that resists humidity and chemical cleaners commonly found in restrooms. Edge sealing is applied to all exposed surfaces to prevent water ingress.

Structural reinforcement comes from a 1.2 mm cold‑rolled steel C‑channel running vertically behind the mirror, providing a load capacity of up to 150 kg per unit when properly anchored to studs or concrete backing.

The mirror is 6 mm tempered glass, silver‑backed, with a protective polymer coating that reduces scratching and improves impact resistance. The glass is bonded to the door using a UV‑cured adhesive rated for continuous exposure to temperatures between –10 °C and +50 °C.

Dimensions & Configurations

Standard tall cabinets are available in three height ranges to suit different ceiling clearances: 1800 mm, 2000 mm, and 2200 mm. Width options are 400 mm, 450 mm, and 500 mm, with a consistent depth of 200 mm.

Internal shelving consists of two adjustable steel‑supported shelves spaced at 300 mm intervals, each shelf rated for 25 kg. The shelf brackets are perforated to allow ventilation and reduce moisture buildup.

Door swing can be specified as left‑hand or right‑hand hinge, and a soft‑close damper is optional for high‑traffic installations.

Installation & Mounting

Mounting is achieved through four M8 × 60 mm steel bolts that pass through reinforced backing plates welded to the steel frame. The bolts engage with either wooden studs (minimum 38 mm × 89 mm) or concrete anchors rated for at least 5 kN shear.

A leveling bracket integrated into the top rail allows ±5 mm vertical adjustment after initial fastening, ensuring alignment of multiple units in a row. Installation time per unit averages 12 minutes for a two‑person crew using standard tools.

Applications

In hotels and resorts, the tall mirrored cabinet provides guests with full‑length viewing while storing toiletries, reducing clutter on vanity tops. The vertical orientation matches narrow bathroom layouts common in urban properties.

Healthcare facilities benefit from the easy‑to‑clean surfaces and antimicrobial laminate options, which support infection‑control protocols. The mirror’s tempered glass meets safety standards for high‑risk areas.

Educational institutions and office buildings install these cabinets in staff restrooms where durability and low maintenance are prioritized over decorative finishes.

Customization Options

Finish selections include matte white, matte gray, and wood‑grain laminate, all available with optional anti‑fingerprint coating. Mirror enhancements such as anti‑fog heating elements or integrated LED lighting strips can be factory‑installed.

Hardware upgrades consist of stainless‑steel hinges, concealed magnetic catches, and heavy‑duty soft‑close mechanisms rated for 100,000 cycles. Interior accessories like pull‑out baskets or towel bars are offered as modular add‑ons.

For projects requiring non‑standard dimensions, the manufacturing process allows width adjustments in 25 mm increments and height changes in 50 mm steps without altering the structural steel frame.

Quality Control & Testing

Each cabinet undergoes a three‑stage inspection: dimensional verification (±1 mm tolerance), mirror adhesion strength (minimum 1.5 MPa), and load cycling (5,000 open‑close operations at 10 kg load).

Humidity resistance is tested per ASTM D2247, exposing units to 95 % RH at 38 °C for 240 hours with no visible delamination or warping. Finished surfaces are checked for gloss uniformity using a 60° glossmeter, targeting a range of 15‑25 GU for matte laminates.

Final packaging includes corner protectors and a polyethylene shrink wrap that meets ISTA 3A standards for transit durability.

Packaging & Shipping

Units are packed flat‑packed in double‑wall corrugated cartons with internal foam edges. Each carton holds one cabinet to minimize handling damage during bulk shipments.

Pallet configuration accommodates 20 units per pallet (approx. 1.2 m × 1.0 m × 1.8 m), facilitating efficient container loading. Shipping marks include QR codes linking to installation drawings and warranty documentation.

Typical Specifications

Frequently Asked Questions

Can dimensions be customized?

Yes. Width can be adjusted in 25 mm increments and height in 50 mm steps; the steel frame remains unchanged, preserving load capacity.

What information is required before quotation?

Provide required quantity, desired finish, mirror options (plain, anti‑fog, LED), hinge side, and any accessory selections (shelves, baskets, lighting).

What materials are available for the cabinet body?

Standard is melamine‑finished MDF; optional moisture‑resistant MR‑grade MDF or marine‑grade plywood can be supplied upon request.

How is quality inspected?

Each unit passes dimensional check, mirror adhesion test, and 5,000‑cycle operation test before packaging.

What packaging methods are available?

Flat‑packed single‑unit cartons with corner protection; palletized for bulk orders. Custom crating available for overseas projects.

How are export shipments protected?

Cartons comply with ISTA 3A; additional edge boards and stretch wrap can be added for high‑risk routes.

What is the typical production lead time?

Lead time ranges from 3 to 4 weeks for standard configurations; custom finishes or accessories may extend to 5–6 weeks.

How are samples arranged?

Samples are shipped via express courier; charges are credited against the first order exceeding 10 units.

For technical data sheets, pricing, or to discuss a custom specification, contact our engineering team.