B2B Tall Slim Freestanding Bathroom Cabinets

These units are engineered for environments where floor space is limited but vertical storage is essential, such as hotel suites, healthcare facilities, and premium office washrooms. The slim profile reduces the footprint while maintaining usable interior volume.

Design and Ergonomics

The cabinet stands at a nominal height of 1800 mm with a width of 300 mm and depth of 350 mm, allowing installation alongside narrow corridors or between fixtures. A recessed handle integrated into the door edge eliminates protrusions that could impede traffic flow.

Internal shelving is adjustable in 25 mm increments, enabling configuration for varied item heights without tools. The door swings 110° outward, facilitated by concealed soft‑close hinges that reduce impact noise and wear.

Construction Materials

Primary structure uses 18 mm moisture‑resistant MDF core bonded with a melamine laminate rated for 150 h of steam exposure per EN 438‑2. Edge sealing employs PVC‑free ABS tape to prevent delamination in high‑humidity zones.

Optional upgrades include marine‑grade plywood core for areas with direct water contact and antimicrobial surface coatings that inhibit bacterial growth per ISO 22196.

Dimensions and Load Capacity

Parameter	Typical Value	Notes
Overall Height	1800 mm	Includes leveling feet
Width	300 mm	Slim profile for tight spaces
Depth	350 mm	Clear interior depth 300 mm
Door Opening Angle	110°	Soft‑close hinge
Shelf Load Rating	20 kg per shelf	Uniformly distributed load
Total Unit Weight	28 kg	MDF core configuration

Installation and Mobility

Four adjustable leveling feet accommodate floor variances up to 15 mm, ensuring vertical alignment without shimming. Each foot incorporates a non‑marking polyurethane pad to protect finished flooring.

Optional factory‑installed casters (lockable, 75 mm diameter) transform the unit into a mobile supply cart, retaining the same load ratings when locked.

Applications in Commercial Facilities

In hospitality settings, the tall slim form factor provides guest amenities storage adjacent to vanities without compromising circulation paths. Healthcare installations benefit from the antimicrobial surface option, reducing cross‑contamination risks in patient bathrooms.

Office complexes use these cabinets to store cleaning supplies in narrow janitorial closets, where traditional wide units would obstruct door swings. The freestanding nature eliminates the need for wall anchoring, preserving lease‑friendly install‑out.

Customization Options

Height can be adjusted in 50 mm increments between 1600 mm and 2100 mm to match specific ceiling clearances or ergonomic reach requirements. Width adjustments are available in 25 mm steps from 250 mm to 400 mm.

Interior accessories include pull‑out trays, stainless steel baskets, and integrated power strips with surge protection, each mounted via pre‑drilled mounting rails that maintain structural integrity.

Finish selections span over 30 laminate colors and wood grain patterns, all meeting the same wear‑resistance baseline. Custom laser‑etched logos or signage can be applied to the door panel upon request.

Quality Assurance and Testing

Every unit undergoes a 24‑hour humidity cycle at 90 % RH and 38 °C to verify laminate adhesion and edge seal performance. Door hinge endurance is validated through 50 000 open‑close cycles per EN 1191.

Load testing applies a static 25 kg force to each shelf for 10 minutes; deflection is measured and must remain under 2 mm. Final visual inspection checks for surface uniformity, edge consistency, and hardware alignment.

Packaging and Shipping

Cabinets are packed in double‑wall corrugated cartons with interior corner protectors and a polyethylene moisture barrier. Each pallet holds up to six units, secured with strapping and stretch film to prevent shift during transit.

For export shipments, ISPM‑15 compliant wooden pallets are available, and the packaging includes shock‑indicating labels that activate if acceleration exceeds 2 g.

Frequently Asked Questions

Can dimensions be customized? Yes, height, width, and depth are adjustable within the ranges stated; custom tooling is not required for standard increments.

What information is needed for a quotation? Provide required overall dimensions, material core preference (MDF or plywood), finish code, and any accessory selections (shelves, casters, power strips).

How is quality inspected before shipment? Each unit passes humidity cycling, hinge endurance, load deflection, and visual inspection as outlined in the quality assurance section.

What packaging methods protect the finish? Interior corner protectors, moisture barrier film, and edge‑guard cardboard strips prevent scuffing and edge damage during handling.