B2B Free Standing Bathroom Vanity With Sink
Free Standing Bathroom Vanity with Integrated Sink – B2B Specification
A free standing bathroom vanity with integrated sink is designed for installations where floor‑mounted cabinetry is preferred over wall‑hung units. The unit combines a storage base, countertop, and basin in a single rigid assembly.
Overall footprint typically ranges from 600 mm to 1200 mm in width, 460 mm to 560 mm in depth, and 800 mm to 860 mm in height. The structure supports a static load of up to 150 kg distributed across the countertop, accommodating heavy usage in commercial environments. Water resistance is achieved through sealed edges and a minimum 2 mm thick moisture‑resistant barrier beneath the sink bowl.
The carcass is constructed from 18 mm thick, moisture‑resistant MDF core bonded with a melamine‑laminate finish that meets EN 14322 standards for surface durability. The sink bowl is formed from vitreous china with a glaze thickness of 0.8 mm, providing chemical resistance to common cleaning agents. Optional upgrades include solid surface (acrylic‑based) or stainless steel (grade 304) basins, each with distinct thermal expansion coefficients. All adhesive joints use polyurethane resin with a shear strength exceeding 2.5 MPa.
Assembly employs cam‑lock fasteners and PVC edge banding to prevent delamination at joints exposed to periodic moisture. The countertop is affixed to the base via concealed brackets that allow for leveling adjustment of ±3 mm. Drain openings are pre‑drilled to standard 35 mm diameter, with optional sealing gaskets supplied for IP‑44 rated installations.
Customization is limited to geometric and finish parameters that affect installation compatibility and aesthetic integration.
- Width adjustable in 50 mm increments from 600 mm to 1200 mm.
- Depth options: 460 mm, 500 mm, 560 mm.
- Height variations: 800 mm (standard), 860 mm (accessible).
- Finish choices: melamine‑laminate (white, gray, oak), HPL, or veneer.
- Basin configurations: single center, dual offset, or corner placement.
- Faucet hole patterns: 1‑hole, 2‑hole (8″ spread), or 3‑hole (4″ spread).
Typical applications include hotel guest rooms, healthcare facility restrooms, and high‑traffic commercial washrooms where floor‑mounted units simplify plumbing rough‑in and facilitate easier maintenance access.
Quality control involves dimensional verification of ±1 mm on critical interfaces, visual inspection of edge banding adhesion under 48 h humidity cycling, and hydrostatic testing of the sink basin at 0.5 MPa for 10 min to confirm leak‑free performance.
Packaging and shipping options are designed to protect edges and surfaces during transit.
- Individual units wrapped in 150 µm polyethylene film with corner protectors.
- Stacked on pallets with interstitial cardboard layers and secured with PET straps.
- Pallet dimensions 1100 mm × 1100 mm, max height 1800 mm, load capacity 1200 kg.
- Export shipments include ISPM‑15 compliant wooden pallets and moisture‑barrier sachets.
| Parameter | Typical Range | Tolerance |
|---|---|---|
| Width | 600 mm – 1200 mm | ±2 mm |
| Depth | 460 mm – 560 mm | ±2 mm |
| Height | 800 mm – 860 mm | ±3 mm |
| Countertop Thickness | 18 mm | ±0.5 mm |
| Sink Bowl Depth | 150 mm – 180 mm | ±2 mm |
Frequently Asked Questions
Can dimensions be customized beyond the standard ranges?
Width and depth adjustments are available in 50 mm increments upon request; height modifications require structural review and may affect load ratings.
What information is required before quotation?
Project‑specific dimensions, desired finish, basin material, faucet hole pattern, and any required accessories such as side panels or splashbacks.
How is quality inspected before shipment?
Each unit undergoes dimensional checks, visual inspection of edges and seams, and a hydrostatic leak test on the sink basin; results are recorded in the batch traceability system.
To discuss your specific requirements or obtain a detailed quotation, please request a quotation.
