36 Free Standing Vanity Manufacturers
36 Inch Free-Standing Vanity – Technical Overview
Product Overview
The vanity is a freestanding cabinet designed to support a countertop basin and provide storage beneath. Its footprint is fixed at 914 mm width, 560 mm depth, and 850 mm height, allowing installation in standard bathroom layouts without wall anchoring.
Key Specifications
| Property | Typical Value |
|---|---|
| Overall Width | 914 mm (36 in) |
| Overall Depth | 560 mm (22 in) |
| Overall Height | 850 mm (33.5 in) |
| Cabinet Interior Clear Height | 720 mm (28.3 in) |
| Drawer/Door Opening Height | 180 mm (7.1 in) per drawer, 360 mm (14.2 in) per door |
| Maximum Static Load (evenly distributed) | 150 kg |
Material Selection
Core panels are typically fabricated from moisture‑resistant MDF or particleboard, faced with either high‑pressure laminate (HPL), solid surface (acrylic‑modified polyester), or thin‑veneer wood. Edge sealing uses PVC or ABS edge banding to prevent water ingress. All materials meet Class 1 fire rating and are compliant with CARB Phase 2 formaldehyde limits.
- HPL over particleboard – scratch resistant, easy to clean
- Solid surface – seamless appearance, repairable
- Veneer‑finished MDF – natural wood aesthetic with protective topcoat
Dimensional Tolerances
Critical dimensions are inspected during production using calibrated digital calipers. Width and depth tolerances are held to ±0.5 mm, height to ±0.7 mm, and internal cabinet openings to ±0.3 mm to ensure proper fit of drawers, doors, and countertop cut‑outs.
Load and Structural Performance
The carcass employs a full‑depth dado joint reinforced with cam locks and metal brackets, providing a shear capacity exceeding 200 kg before joint deformation. The countertop support rail is sized to distribute a 150 kg load across the cabinet width, limiting deflection to less than 0.2 mm under test conditions.
Installation Considerations
Installation requires a level floor with a tolerance of ±2 mm over the vanity footprint. Adjustable leveling feet (range 0–15 mm) compensate for minor floor unevenness. No wall fixation is necessary; however, anti‑tilt brackets can be added for seismic zones if desired.
Customization Options
The vanity can be adapted to specific project requirements through the following configurable elements:
- Number and arrangement of drawers (0‑3) or doors (0‑2)
- Faucet hole configurations: single, widespread, or wall‑mounted
- Countertop overhang options: 0 mm, 13 mm, or 25 mm front overhang
- Finish selections: matte, gloss, textured, or custom color match
- Integrated features: soft‑close hinges, pull‑out organizers, interior lighting
Quality Assurance Process
Each unit undergoes a three‑stage inspection: incoming material verification, in‑process dimensional checks, and final functional testing. Surface finish is assessed visually against a standardized gloss meter reading (target 30‑70 GU depending on finish). Packaging includes corner protectors and a double‑wall carton tested to ISTA‑3A standards for drop and vibration resistance.
Typical Applications
These vanities are specified in hospitality guest rooms, multi‑family residential units, and commercial restrooms where a freestanding solution simplifies renovation and reduces reliance on structural wall support. Their modular design enables rapid replacement or reconfiguration without extensive demolition.
Frequently Asked Questions
Q: Can the overall dimensions be altered for a custom layout?
A: Width and depth are fixed at 914 mm × 560 mm to maintain structural integrity; height can be adjusted in 25 mm increments upon request.
Q: What information is required to obtain a quotation?
A: Project quantity, desired material/finish, drawer/door configuration, faucet hole pattern, and delivery destination.
Q: How is quality inspected before shipment?
A: Final inspection includes dimensional verification (±0.5 mm), load test simulation, and visual surface audit per ISO 4287.
Q: What packaging methods are available for export?
A: Standard export‑grade carton with corner foam, optional wooden crate for high‑volume shipments.
Q: What is the typical production lead time?
A: 4‑6 weeks after receipt of approved drawings and deposit, subject to material availability.
Contact for Technical Inquiry
For detailed CAD files, load‑test reports, or to request a quotation, please reach out to our engineering team.
